T1N Injector Fault Reset Help 02 316CDI

Zfcyp

Member
Tried to start engine with injector 5 unplugged threw EDC code and will not clear, reset!! cranks no start, edc light stays on. Please Help
 

Colorado_Al

Well-known member
You'll need a code reader that can do MB specific.
You might try removing the ground from the battery overnight and then reconnecting it in the morning and trying it again
 

Zfcyp

Member
Any idea on a reader that will do the job? The 02 has the round 14pin OBD connector. Looking today at the Autel any other sugestions?
 

Cheyenne

UK 2004 T1N 313CDi
Get an Autel MD802 All Systems, MD808 PRO or an AP200 BlueTooth dongle and mobile phone and then follow this thread...


Keith.
 

Top Bottom