2019 Backwoods adventure mods bumper installed!

grantwilson

FreedomVanGo
Finally got the time ot put it on!

Front end build:
Backwoods Adventure Mods bumper, no bull bar
Warn Zeon 12-s Winch
Trigger 6 shooter
Diode Dynamics SS3 pro SAE Driving
Diode Dynamics SS3 pro SAE Fog
Factor 55 flatlink
Warn Shackles
Van Compass Hoodline Mount
Diode Dynamics SS3 Pro Spot
ARB Twin compressor
air chuck
3 gallon tank
air horns

Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
 

VanGoSki

Well-known member
That looks awesome. I do have to question the wisdom of that air-fitting sticking straight out of the bumper though.
 

JFloFoto

Active member
That looks awesome. I do have to question the wisdom of that air-fitting sticking straight out of the bumper though.
That's an easy fix.



Maybe it's just the angle of the photo, but the air intakes on the ARB do not look ideally situated. Maybe a remote set-up?

Sent from my Pixel 3 using Tapatalk
 

grantwilson

FreedomVanGo
they fit fine. there is no need for space on the backside since they draw in from the sides and compressor side of the intake. you can have something sitting against it and still be perfectly fine.

I will be changing out the bulkhead fitting to be a bit more low profile. I just had this sitting here
 

RoverAG

New member
Finally got the time ot put it on!

Front end build:
Backwoods Adventure Mods bumper, no bull bar
Warn Zeon 12-s Winch
Trigger 6 shooter
Diode Dynamics SS3 pro SAE Driving
Diode Dynamics SS3 pro SAE Fog
Factor 55 flatlink
Warn Shackles
Van Compass Hoodline Mount
Diode Dynamics SS3 Pro Spot
ARB Twin compressor
air chuck
3 gallon tank
air horns

Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Looks great! Just ordered the same bumper. I’d like to order the accessories you chose.

Is the WARN winch visible from the front or buried behind the bumper?

The two horse shoe like hooks are called shackles?

The red is a Factor55 FlatLink Loaded Shackle Mount?

What is to the left of the red Shackle Mount?

Thanks much.
 

619baller

Member
Finally got the time ot put it on!

Front end build:
Backwoods Adventure Mods bumper, no bull bar
Warn Zeon 12-s Winch
Trigger 6 shooter
Diode Dynamics SS3 pro SAE Driving
Diode Dynamics SS3 pro SAE Fog
Factor 55 flatlink
Warn Shackles
Van Compass Hoodline Mount
Diode Dynamics SS3 Pro Spot
ARB Twin compressor
air chuck
3 gallon tank
air horns

Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Untitled by FreedomVanGo Van Builders, on Flickr
Where do you buy your air horn setup?
 

grantwilson

FreedomVanGo
Looks great! Just ordered the same bumper. I’d like to order the accessories you chose.

Is the WARN winch visible from the front or buried behind the bumper?

The two horse shoe like hooks are called shackles?

The red is a Factor55 FlatLink Loaded Shackle Mount?

What is to the left of the red Shackle Mount?

Thanks much.
You can see the drum
Shackles, yes
It is a flatlink
Air chuck!
 

Pharkas

2020 Passenger 4x4 144
Deciding between backwoods bumper and Aluminess bumper. Any trouble with the sensors or front radar? Do you like it now that it's been on there? Anything you would do different?
 

Happy29

2020 2500 OM642 4x2 170HR
The Backwoods one is the only bumper I’ve found that would be of much use if striking a dear or moose or head on swipe of another vehicle.
 

Go4adVanture

New member
I recently finished installing a Backwoods front bumper. I’m getting a message on my dash that my brake assist in not operating. Obviously related to my front sensor which was installed per instructions without any issues. I’m hoping it’s just an easy tweak at dealer?
I’m also getting a a continuous beep when I put in reverse from their large aluminum cabinet on back. It shows a Red line across the top of the box on my camera screen.
 

grantwilson

FreedomVanGo
I recently finished installing a Backwoods front bumper. I’m getting a message on my dash that my brake assist in not operating. Obviously related to my front sensor which was installed per instructions without any issues. I’m hoping it’s just an easy tweak at dealer?
I’m also getting a a continuous beep when I put in reverse from their large aluminum cabinet on back. It shows a Red line across the top of the box on my camera screen.
You will obviously get a beeping on the rear, it is what it is. you are obstructing sensors.

For the front, if it doesn't reset itself after 50-100 miles, a dealer recalibration may be necessary. we have seen it on about 15% of cases where it may need it.
 

Top Bottom