sailnimble@yahoo.com
Member
We're in Banff Canada where the temperatures have ranged from 26F to -5F over the past 5 days. Yesterday our espar cabin heater stopped working. We plugged in an Autel-AutoLink A319 code reader and the code is as below.
Stored 1/1
P0100 $12 Generic
================= ======
Mass or Volume Air Flow
A Circuit
Does anyone know if this code is related to the espar cabin heater? Underneath the van we noticed a short piece of accordion hose that has a small 3-5mm hole in it. It seems logical that it could affect the airflow and therefore the duct flow if that hose is part of the espar ducting. See attached photo.
Any suggestions for getting the cabin heater back on line? We have 7/8 tank full of diesel, house batteries fully charged and we're plugged into electricity at a campground. Thanks
Stored 1/1
P0100 $12 Generic
================= ======
Mass or Volume Air Flow
A Circuit
Does anyone know if this code is related to the espar cabin heater? Underneath the van we noticed a short piece of accordion hose that has a small 3-5mm hole in it. It seems logical that it could affect the airflow and therefore the duct flow if that hose is part of the espar ducting. See attached photo.
Any suggestions for getting the cabin heater back on line? We have 7/8 tank full of diesel, house batteries fully charged and we're plugged into electricity at a campground. Thanks
Attachments
-
103.6 KB Views: 109