EDC light with fuel contamination light please help.


New member
311 cdi 2003. The van is going into limp mode i had it scanned and these are the codes
p1470 boost pressure sensor
p2007 Intake Manif Runner Control Stuck Closed Bank2
p0703 brake switch sensor curcuit
p0110 intake air temp 1 curcuit
p1187 rail pressure
i dont know where to start.


>2,000,000m in MB vans
The boost pressure sensor and brake switches are cheap and easy - if they need swapping - but the rest are going to be difficult to resolve without diagnostic help. Rail pressure code possibly the sensor seal. Time to find a local independant with the right software or dealer.

Top Bottom