The $99 Platform Bed - Some assembly required


New member
Hi, for a 90" bed, 3 beams would be spaced almost 45" apart each.
0" at one end
~45" halfway
~90" other end

There are plywood deflection tables at
I'm not going to try to interpret them right now as my brain is too tired.
Thanks for the reply. This is great. A little Klingon at the moment, which I do not speak, but it seems that 4 cross support should hold us. I will check the calculation, but since I plan to install them in an L track, adding one should not be an issue.

Hope still on to have a bed that does not bend the chassis or collapses on the floor from 3 feet high.


Top Bottom