Gwilym & Eddy the Merckx
2000 208 CDi MWB Bus & 2005 313 CDi 4mWB Crew Van
208CDi, Year 2000, 130,000m, Sprintshift
Revs freely to begin then refuses to go above 2800rpm.
Reading other threads on the forum this apparently points to 'Fuel Rail Pressure Sensor Failure'.
Merc have run diagnostics and found no error codes.
Is it possible either of the following caused this LHM?:
1) I put 1 gallon Petrol in empty tank at fuel pump then realised error, filled to top with diesel and hoped for the best.
2) Exhaust was blowing for some time before I had it repaired.
Is it possible sensors have been contaminated and an 'additive' might help?
Any other ideas?
Revs freely to begin then refuses to go above 2800rpm.
Reading other threads on the forum this apparently points to 'Fuel Rail Pressure Sensor Failure'.
Merc have run diagnostics and found no error codes.
Is it possible either of the following caused this LHM?:
1) I put 1 gallon Petrol in empty tank at fuel pump then realised error, filled to top with diesel and hoped for the best.
2) Exhaust was blowing for some time before I had it repaired.
Is it possible sensors have been contaminated and an 'additive' might help?
Any other ideas?