I made a little more progress:
The galley is starting to come together with all of the compartments and covers.
Mostly missing latch hardware and the exterior panels bonded.
Everything made from aluminum, alucobond (2 aluminum skins with a solid polyethylene core, light but dense) and alumalite (2 aluminum skins with a corrugated polyethylene core, very light)
let's start with the "before" picture:
...and the after:
You can see all of the covers I added to create extra compartments and hide the sink, microwave and fridge.
It's still missing the exterior panels, I had them on, but I won't bond them permanently untill I have plumbed and wired everything.
Below the sink is the waste tank with quick disconnect.
Fresh water tank is in the doghouse between the galley and the drivers seat.
The pump for the sink is in the lower center of the last picture.
There is an easteregg for "eagle-eye" seek in picture 4
Cheers
George
The galley is starting to come together with all of the compartments and covers.
Mostly missing latch hardware and the exterior panels bonded.
Everything made from aluminum, alucobond (2 aluminum skins with a solid polyethylene core, light but dense) and alumalite (2 aluminum skins with a corrugated polyethylene core, very light)
let's start with the "before" picture:
...and the after:
You can see all of the covers I added to create extra compartments and hide the sink, microwave and fridge.
It's still missing the exterior panels, I had them on, but I won't bond them permanently untill I have plumbed and wired everything.
Below the sink is the waste tank with quick disconnect.
Fresh water tank is in the doghouse between the galley and the drivers seat.
The pump for the sink is in the lower center of the last picture.
There is an easteregg for "eagle-eye" seek in picture 4
Cheers
George
Attachments
-
41.5 KB Views: 2,043
-
44.3 KB Views: 2,104
-
36.9 KB Views: 2,508
-
186 KB Views: 2,664
-
192.4 KB Views: 1,980