Fiamma F65 Awning on a Fake Crafter

[ctmcdaniel]

The adapter brackets for the sprinter require removing the load track



the troublesome middle bracket



Middle bracket again, the left side of the bracket hit the roof top
I had to file about 3/16" of aluminum off to make it fit flat
so there was no gap at the bottom.


Rear bracket

 

[ctmcdaniel]

Re: Fiammia F65 Awaning on a Fake Crafter

The Crafter hospital


Center or B support after I filed down the edge
Sikaflex 252 is the black stuff... I have 2 extra tubes of this
Very sticky



Another view of the B support again you can see were I
filed down the left edge if you compare it to the other pictures.




Back of the front support



Back of the Rear support

 

[ctmcdaniel]

It looks less intrusive then I thought it would










Tom McD

 

[sikwan]

Nice addition Tom. That really matches the Van.

 

[Fiamma4us]

Fiamma now has brackets that will mount directly to the rail. So you dont have to remove it. By the way nice photo's it looks very good.

 

[Legwound]

I have an almost identical van

which model of f65 do you have? (what length, etc)