Sam module pin out

[Mattw907]

Hi ,
I have a ‘wiring diagram ‘ for the SAM .
it has no details - I’m chasing the pin out or the way it’s set so I can specifically find the fog light wires to test continuity .
Any help appreciated
Even where to chase the fog light wires into the SAM

 

[Cheyenne]

Back story for the reason @Mattw907 is asking for help... https://sprinter-source.com/forums/index.php?threads/139644/

 

[Mattw907]

Thanks mate - I can’t get any answers from my local MB dealer , my mechanic sourced me a diagram but I’m still in the dark - surely someone has knowledge ?! Haha

 

[Maslin]

Brown is ground.

Right fog is Grey/Yellow, connector MR1, socket 19.

Left fog is Grey/Violet, connector MR2, socket 3.


The 907 has 2 firewall boots vs the 906's 1. A lot of left/right things are split up on different connectors.

 

[Mattw907]

Can you help with MR 1/2? Is it the plug with blue clip by chance ? Is it possible the wires change colour?

 

[Maslin]

Can you help with MR 1/2? Is it the plug with blue clip by chance ? Is it possible the wires change colour?

Pretty sure the connector numbers are printed on the SAM, like in the plastic.

The wires do not change colo(u)r, that's something you can usually count on in Mercedes world.

 

[Mattw907]

Legend mate thanks so much for your help !

im 90% confident it’s just been turned off in the back end somewhere but I want to rule out all possibilities before I hand it to MB to switch on in diagnostics - if you have any thoughts on this let me know .
Bloody vehicles with computers for everything

 

[sam daly]

Legend mate thanks so much for your help !

im 90% confident it’s just been turned off in the back end somewhere but I want to rule out all possibilities before I hand it to MB to switch on in diagnostics - if you have any thoughts on this let me know .
Bloody vehicles with computers for everything

Hi ,
I have a ‘wiring diagram ‘ for the SAM .
it has no details - I’m chasing the pin out or the way it’s set so I can specifically find the fog light wires to test continuity .
Any help appreciated
Even where to chase the fog light wires into the SAM

This will help you