Get your rare 4x4 T1N vans/parts here for a limited time only.

[Midwestdrifter]

A local breaker could remove the subframe and drivetrain, but a complete engine harness would be needed. Should fit onto a couple pallets, and then its LCL to a port on the west coast. From there you would just pick up after customs clearance. Could do on a trailer or similar.

 

[owner]

All the 906/NCV 4x4 vans have now been sold in one lot.

All the 903/T1N 4x4 vans are still available.

 

[owner]

#4 I can't remember the history of this one, I think Eric kept it as a complete spare ready to go. It has had the ambo fitout removed. I should be able to get this running.
View attachment 364344
View attachment 364345

View attachment 364346

This #4 van is now running and driving. I will find out the mileage on it in a couple of weeks time.

 

[abittenbinder]

This #4 van is now running and driving. I will find out the mileage on it in a couple of weeks time.

Are you able to provide the MBenz part number on the engine module's sticker. Should be visible by looking under the dash, upward at the module.

Thanks

 

[owner]

#2 is 225,000km and is running/driving now.
#4 is 180,000km and is also running/driving now.

Both started up and drove up a slippery muddy hillside just fine after sitting for many years.

We have tentative offers on both of the above vans, so if you are on the fence?... now's the time.

 

[owner]

Are you able to provide the MBenz part number on the engine module's sticker. Should be visible by looking under the dash, upward at the module.

Oops I forgot all about this. Do you specifically want the ECU sticker from a 4x4 T1N or will a 2WD ROW one do?

 

[abittenbinder]

Oops I forgot all about this. Do you specifically want the ECU sticker from a 4x4 T1N or will a 2WD ROW one do?

Thanks for remembering and asking! Any ROW 2WD with the 2.7 ltr 5 cyl (sans EGR and MAF) and a manual 5 speed gearbox is fine. If your could included the build date that would be helpful. Andy

 

[owner]

Manual vs Auto is just in the SCN coding not the ECU HW/SW version. I can show you an Auto RWD 5 cyl, or a Manual 4x4 5 cyl. I don't have access to a Manual RWD 5cyl.

 

[abittenbinder]

Manual vs Auto is just in the SCN coding not the ECU HW/SW version. I can show you an Auto RWD 5 cyl, or a Manual 4x4 5 cyl. I don't have access to a Manual RWD 5cyl.

I would like to see the Benz ECU part# on both and any build date of vehicles info would be welcome. Andy

 

[owner]

I would like to see the Benz ECU part# on both and any build date of vehicles info would be welcome. And

These are 4x4 5 speed manuals...
11/03


09/02

 

[abittenbinder]

Thanks! Very helpful information

 

[owner]

RWD AUTO 11/03

So it looks like it is different, this one has "+G40" on the barcode vs the 4x4 Manual 11/03.

 

[abittenbinder]

Is this one from the auto. RWD you mentioned earlier?

 

[owner]

Is this one from the auto. RWD you mentioned earlier?

Auto RWD. What you need now is a manual RWD, so you can see if "+G40" is for the lack of 4x4, or for the transmission.

 

[abittenbinder]

I suspect it is not lack of 4X4 related. Hope you are able to find a manual RWD for inspection. Thanks again

 

[Cheyenne]

I suspect it is not lack of 4X4 related. Hope you are able to find a manual RWD for inspection. Thanks again

I've got a UK four cylinder manual RWD if that will help???

 

[abittenbinder]

Thanks but it will need to be a 612 2.7 manual.

 

[owner]

5cyl manuals are pretty rare here.

 

[BT50]

Thoughts for ERIC. Right driver side wiper arm broke. Would appreciate if I could buy one off you with washer nozzle. Tapered arm whole 8mm to 13 or 14 mm whole wiper arm give or take 630 to 640 mm. australian 412DTn1 901 1999. I need it posted to 14 Alexandra Av BILOELA QLD 4715. My photos aretoo big and cant send. My phone is 0417243848 can you give me a phone call Please.

 

[owner]

Sorry we are just trying to get rid of whole vans at the moment. This may change in the future, but not for a while. You can get wiper arms off eBay I did that for mine rather than running crusty old used ones. You just need to give them a little tweak for RHD use, so there are plenty available overseas.