diesel particulate filter

  1. R

    Cracked Particulate filter!

    Hello all! I recently had an issue with my sprinter and I would really appreciate your advice (year 2014, 4x4 sprinter). After the "service b" they found a small crack in the coupling of the particulate filter. It is noticeable when accelerating when you put your hand next to it. My sprinter...
  2. C

    Professional Tuning ..Emulators .. Deletes ..STAGE 1? Ncv3 2010+

    Hi Guys, I have a NCV3 2011 sprinter with 200k miles and I had a check engine for def heater(I had it for over 2 year and finally got to fixing it ) so I replaced it but soon afterwords i was awarded with a limited starts message. Coincidently it came at the time when I needed the van and...
  3. Deancm

    My regular DPF cleaning experience

    This is my experience with a properly operating DPF, Diesel Particulate Filter, automatic cleaning process on a 2008 Mercedes Benz, NCV3 van with a 3 liter V6 engine. Between 54,000 and 61,000 miles it has averaged an automatic cleaning every 610 miles which takes about 10 miles to complete at...
  4. A

    DEF

    if the dosing valve is not spraying or not spraying enough def fluid will the DPF clog ? or if it sprays too much?
  5. M

    Recurring emission codes in 2010 Sprinter

    Hello! First post here. I deliver coffee for a roastery, and we just bought a 2010 Mercedes Benz 2500 Sprinter as our delivery vehicle. I'm absolutely thrilled that we got it. It seems to be in great condition, with 265,000 miles on it. And it has a lot more room than the converted Toyota...
  6. R

    Sprinter DPF Service Kits - Lower Mainland, BC

    Reflow Solutions is a diesel particulate filter (DPF) specialist based out of Port Coquitlam, BC. We clean, recondition, test and install service kits for all types of DPF's including Sprinters. Service kits are installed to your existing Sprinter DPF to allow easy access to the core so proper...
  7. N

    Another DPF confusion - Code: Particulate filter is too high for regeneration

    Hello, I got code 3 days ago: Code: Particulate filter is too high for regeneration - my generic OBDII scanner shows code P0242f. Current standing: at that moment I had on average 20-21.5 mpg almost every day (without A/C), mixed ride with 5% idleing, half-half cty/hwy. NO oil burn between the...

Top Bottom