adhesive

  1. XYZdayz

    Installing a fan and skylight when there are square metal frames welded underneath the roof skin???

    Any suggestion for this fan and skylight install? There is a 1 -1/2" square metal tube frame welded into the roof supports around the 14"x 14" roof penetration for the fan (also for a skylight) I bought a frame adapter for the roof ribs and the instructions says "you only want the screw to...
  2. XYZdayz

    How to install maxxair fan and skylight with metal frames welded underneath the outer skin

    Just about to install two new maxx air fans and a new 17" x 24" skylight in a remodel that had a big leak problem. Sigh... I bought a frame adapter for the roof ribs and the instructions says "If the screws are going to go into a roof support beam, then drill a clearance hole in the beam. You...
  3. A

    HELP! Need to remove previously glued down floor.

    New to the forum and hit my first major buildout roadblock. Hoping somebody out there has dealt with a similar issue. We just bought a new Sprinter, but unfortunately the only new 2500 we could find locally was one that had been ordered by a construction company, then "upfitted" with plastic...

Top Bottom