Destination Unknown
Member
313cdi 903 Sprintshift.
October last year was fitted with Relay,Pump with wire harness.
A while back driving normal it jumped into limp mode.stopped and restarted no more problems.
Was parked up for two nights and would not engage gears. When it did and last few days random faults.
Press brake pedal and put in gear, N flashing,
From stop, start engine. Takes a while to find a gear, waggling the gear stick.
Sometimes gets Auto, other times 1,2,3 only.
If we do get it to go into gear, will not change up , so manually 1,2,3.. then if pop into neutral and back in drive, can get it to change up the gearbox.
Just stopped working fine in Auto. Left engine running. Select gears and back to first gear, no Auto.
Ign on only, can select forward and reverse and can hear selector working. But once started faults as above start.
Have disconnected loom from gearbox ecu . Going to check under on gearbox connectors ect.
Anything else we can look at or check.
No fault codes showing on obd2.
October last year was fitted with Relay,Pump with wire harness.
A while back driving normal it jumped into limp mode.stopped and restarted no more problems.
Was parked up for two nights and would not engage gears. When it did and last few days random faults.
Press brake pedal and put in gear, N flashing,
From stop, start engine. Takes a while to find a gear, waggling the gear stick.
Sometimes gets Auto, other times 1,2,3 only.
If we do get it to go into gear, will not change up , so manually 1,2,3.. then if pop into neutral and back in drive, can get it to change up the gearbox.
Just stopped working fine in Auto. Left engine running. Select gears and back to first gear, no Auto.
Ign on only, can select forward and reverse and can hear selector working. But once started faults as above start.
Have disconnected loom from gearbox ecu . Going to check under on gearbox connectors ect.
Anything else we can look at or check.
No fault codes showing on obd2.