Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter RV's & Conversions Talk

Sprinter RV's & Conversions Talk Common features found in Sprinter RV's and Conversions.


 
Thread Tools Display Modes
Old 01-18-2019, 10:06 PM   #31
Hoosier 45
 
Join Date: Nov 2016
Posts: 20
Thanks: 1
Thanked 1 Time in 1 Post
Default Re: general plywood thickness for cabinets

I used 1/4" Baltic birch for all of my cabinets and the short queen sized bed. Great stuff, light, strong, stiff and straight. I used full length glue block in every corner. Then screwed and glued.
Hoosier 45 is offline   Reply With Quote
The Following User Says Thank You to Hoosier 45 For This Useful Post:
CJPJ (01-18-2019)
Old 01-18-2019, 10:43 PM   #32
Island Jim
 
Join Date: Mar 2015
Location: Vashon Island
Posts: 118
Thanks: 14
Thanked 55 Times in 36 Posts
Default Re: general plywood thickness for cabinets

Check out Apple Ply at Cross Cut, used 1/2" and 1/4" in my cabinets. Very nice material but expensive. I am also on Vashon send a message if you want to check out our van.
Island Jim is offline   Reply With Quote
Old 01-19-2019, 12:05 AM   #33
flyag1
 
Join Date: Feb 2012
Posts: 95
Thanks: 0
Thanked 28 Times in 20 Posts
Default Re: general plywood thickness for cabinets

Here is what I've been doing:

I cut the bottom using 1/2 Russian birch, it's a 7 ply and very stable strong.
Then I take 2" wide strips of the same birch and glue / nail brad this 2" piece to the outside edges of the bottom of the drawer.
Basically now I have a box that will become a draw except the sides are only 2" tall.
Finally I wrap another ring of 1/4 around the outside of the 1/2 thick base and glue and brad it together. Cut this piece as tall as you want the finished draw.
You can cut the 1/4 as tall as you like. I have some drawers that are 12" tall.
Attaching the corners of he 1/4 ply can be accomplished by clueing 1/2 square stock into the joint. Done:
Attached Images
File Type: jpg drawer.jpg (49.7 KB, 30 views)
flyag1 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 08:45 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.