Go Back   Sprinter-Forum > NCV3 Sprinters > NCV3 Talk

NCV3 Talk General Discussions related to NCV3 Sprinters.

Thread Tools Display Modes
Old 07-21-2018, 09:33 PM   #1
Join Date: Aug 2016
Location: Saint Simons Island
Posts: 48
Thanks: 5
Thanked 5 Times in 4 Posts
Default Panel Clips Question

I am putting the rear currogated panels from a passenger van in my cargo (over the wheel arch). Was at my local MB dealer trying to get clips, but the part number he gave me was for the type of clips that held on the original thin panels. I had a few left over and tried them and they were not the correct ones, so I was glad I did not order them. Does anyone have the part number ( or a picture) so that I can order the correct items?
Thanks in advance.
H2oboxer is offline   Reply With Quote
Old 07-23-2018, 11:40 PM   #2
2016 Sprinter 144" 4x4
Join Date: Nov 2016
Location: Colorado
Posts: 166
Thanks: 112
Thanked 158 Times in 68 Posts
Default Re: Panel Clips Question

My 2016 crew van had the plastic corrugated panels on the sides and they were installed with self-tapping sheet metal screws into the wall supports, not clips. This is how they did it from the factory.
levinro is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 05:15 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.