Sprinter-Forum    
 

Go Back   Sprinter-Forum > NCV3 Sprinters > NCV3 Write-Ups

NCV3 Write-Ups Help other NCV3 owners by posting your experience working on your Sprinter.


 
Thread Tools Display Modes
Old 07-19-2018, 10:53 PM   #1
seantjacklin
 
Join Date: Jul 2016
Posts: 44
Thanks: 7
Thanked 36 Times in 10 Posts
Default DIY Door Mosquito Net

Howdy all,

I just got finished putting together a mosquito net on the sliding side door, and honestly not sure how I survived without it. It's adapted from an affordable kit on Amazon, and took about an hour to install. Have a gander!



I published the post on my blog, here.
seantjacklin is offline   Reply With Quote
The Following 8 Users Say Thank You to seantjacklin For This Useful Post:
96r50 (07-20-2018), Obliged (07-20-2018), odix@yahoo.com (09-14-2019), Shredgnarr (07-20-2018), Sprinter Bob (08-17-2018), Terrapin (06-26-2019), wmcbride (07-20-2018), Yellow518 (07-22-2018)
Old 07-20-2018, 02:57 AM   #2
Daystar
 
Join Date: Jan 2015
Location: Issaquah, WA
Posts: 145
Thanks: 159
Thanked 30 Times in 24 Posts
Default Re: DIY Door Mosquito Net

Good job!
Daystar is offline   Reply With Quote
Old 07-20-2018, 03:47 AM   #3
pfflyer
 
pfflyer's Avatar
 
Join Date: Mar 2013
Location: Home of the Walking Dead
Posts: 3,965
Thanks: 1,188
Thanked 1,615 Times in 1,219 Posts
Default Re: DIY Door Mosquito Net

How is held in?
__________________
Full time cargo part time camper.
My convertible Sprinter http://sprinter-source.com/forum/showthread.php?t=39367
2013 long tall convertible crew van used for work now
2016 Jayco Melbourne 24K Class C on 2015 Sprinter chassis
pfflyer is online now   Reply With Quote
Old 07-20-2018, 04:44 AM   #4
sprinterPaul
 
Join Date: Apr 2015
Location: 74 and Sunny
Posts: 1,077
Thanks: 441
Thanked 698 Times in 423 Posts
Default Re: DIY Door Mosquito Net

Quote:
Originally Posted by pfflyer View Post
How is held in?


Tuck under the door seal/gasket.


Sent from my iPhone using Tapatalk
sprinterPaul is offline   Reply With Quote
Old 07-22-2018, 05:49 AM   #5
seantjacklin
 
Join Date: Jul 2016
Posts: 44
Thanks: 7
Thanked 36 Times in 10 Posts
Default Re: DIY Door Mosquito Net

Quote:
Originally Posted by pfflyer View Post
How is held in?
The gasket seems to do a fine job of keeping the net tucked against the flange without any need for adhesive.

Sean
seantjacklin is offline   Reply With Quote
Old 06-24-2019, 08:26 PM   #6
Garandman
 
Garandman's Avatar
 
Join Date: Mar 2019
Location: Boston, MA & Sunapee, NH
Posts: 519
Thanks: 250
Thanked 202 Times in 134 Posts
Default Re: DIY Door Mosquito Net

I am planning on making some for myself, using netting and gaffer’s tape.

I’d like to hold them on with magnets. If you’ve done this, what magnets did you use?
__________________
2006 Sprinter 118 ~ 16 Rial Transporter rims ~ 235/65x16
Garandman is offline   Reply With Quote
Old 06-26-2019, 01:49 PM   #7
JJolls
'14 170 4cyl Crew
 
Join Date: Nov 2012
Location: Cincinnati
Posts: 189
Thanks: 143
Thanked 220 Times in 78 Posts
Default Re: DIY Door Mosquito Net

Garandman:
I use rectangular shaped magnets purchased at Ace Hardware for this purpose... they are 2" x 1" covered in plastic (so they won't crack). I use them along the sides and in the foot well to hold the netting tight. Just like the OP, I tuck the top of the netting into the top door gasket. A length of 1/8" rope attached to the top of the netting makes it easier to "tuck" it in under the door gasket... rope is attached to the top of the netting using hot-melt glue.

Following what others have done on this forum, I used a standard patio door screen which opens in the middle and is closed with magnets. I also have a similar set-up for the rear doors.
JJolls is offline   Reply With Quote
The Following User Says Thank You to JJolls For This Useful Post:
Garandman (06-27-2019)
Old 06-26-2019, 06:24 PM   #8
Takayama
 
Join Date: Apr 2012
Location: Pacific NW
Posts: 81
Thanks: 62
Thanked 25 Times in 17 Posts
Default Re: DIY Door Mosquito Net

Following
Takayama is offline   Reply With Quote
Old 08-12-2019, 10:44 PM   #9
auburnsprinter
 
Join Date: Apr 2015
Posts: 28
Thanks: 10
Thanked 4 Times in 3 Posts
Default Re: DIY Door Mosquito Net

Can you show some photos of the rear door screen?


Sent from my iPhone using Tapatalk
auburnsprinter is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 06:34 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.