Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter RV's & Conversions Talk

Sprinter RV's & Conversions Talk Common features found in Sprinter RV's and Conversions.


 
Thread Tools Display Modes
Old 12-08-2019, 07:23 PM   #1
kirbmart
 
Join Date: Jan 2018
Posts: 3
Thanks: 0
Thanked 1 Time in 1 Post
Default CR Lawrence tip-out window stripped

The crank on my CR Laurence tip-out window was over tightened on close, on the sliding door side. I believe it's now stripped because it will not tighten all the way. Anybody know if its possible to fix or do I need to order replacement parts?

Any advise/experience fixing or replacing this would be much appreciated.

Last edited by kirbmart; 12-08-2019 at 07:28 PM.
kirbmart is offline   Reply With Quote
The Following User Says Thank You to kirbmart For This Useful Post:
Surveillance Van (12-08-2019)
Old 12-08-2019, 08:05 PM   #2
jcmadeintheshade@gmail.com
 
Join Date: Feb 2011
Posts: 1,000
Thanks: 322
Thanked 289 Times in 218 Posts
Default Re: CR Lawrence tip-out window stripped

Get an AMA half slider.

This has little to do with fixing your CR Lawrence, but if the suppler does not make good and stand by their product without a fee, it may be time to consider another option.

The AMA half sliders always appealed to me over the small flip up CR Lawrences, so I am biased toward a fuller opening window when wanted.
jcmadeintheshade@gmail.com is offline   Reply With Quote
The Following User Says Thank You to jcmadeintheshade@gmail.com For This Useful Post:
Onefin (12-10-2019)
Old 12-08-2019, 08:35 PM   #3
Surveillance Van
 
Surveillance Van's Avatar
 
Join Date: Dec 2015
Location: On the Road
Posts: 143
Thanks: 546
Thanked 46 Times in 29 Posts
Default Re: CR Lawrence tip-out window stripped

Following have same issue



Thanks


Surveillance Van #34
Surveillance Van is online now   Reply With Quote
Old 12-09-2019, 01:31 AM   #4
hein
Van Guru
 
Join Date: Jan 2011
Location: PacNW
Posts: 2,458
Thanks: 1,421
Thanked 1,927 Times in 1,097 Posts
Default Re: CR Lawrence tip-out window stripped

Here is how I fixed ours: https://sprinter-source.com/forum/sh...&postcount=942

We happen to stock both RH and LH crank mechanisms. Please reach out to Kim to order what you need.
It is possible that only the knob is stripped. We stock those too.

All the best,
Hein
DIYvan
541 490 5098
__________________
2010 MB 3500 RV conversion.

Last edited by hein; 12-09-2019 at 01:35 AM.
hein is offline   Reply With Quote
The Following User Says Thank You to hein For This Useful Post:
Onefin (12-10-2019)
Old 12-09-2019, 02:38 AM   #5
asimba2
2016 4cyl High Roof 144
 
asimba2's Avatar
 
Join Date: Jul 2016
Location: N. CA
Posts: 774
Thanks: 101
Thanked 556 Times in 301 Posts
Default Re: CR Lawrence tip-out window stripped

Not sure where you live but Vanco in Sacramento repaired mine for $50 all-in, labor and parts.
__________________
---------------------------------------
2016 Mercedes Sprinter 4 Cylinder Twin-Turbo Diesel 7-speed | "Built, Not Bought." | https://ourkaravan.com
IG: our.karavan YouTube: ourkaravan
asimba2 is online now   Reply With Quote
The Following 2 Users Say Thank You to asimba2 For This Useful Post:
Onefin (12-10-2019), Surveillance Van (12-09-2019)

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 01:06 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.