Sprinter-Forum    
 

Go Back   Sprinter-Forum > Regional Discussions > Australia, New Zealand, and Asia Pacific


 
Thread Tools Display Modes
Old 07-09-2015, 10:57 PM   #1
johnno the pirate
 
Join Date: Jul 2015
Posts: 3
Thanks: 1
Thanked 2 Times in 1 Post
Default flex plate

just replacing mine now on a 2004 ambo, jeez it makes a racket when they go, sounded like a truck load of anvils falling down a lift shaft. mine would turn over but not start due to smashed sensor, also a bolt had worked out of the torque converter and joined the bits in the bell housing mincer. local sprinter 'guru' thought from the turnover noise that I may have split a piston, so after a 600k tow home ($1200) and a struggle, I got the engine out only to find that it was not necessary . anyway, due to the difficulty getting the remaining torque converter bolts out I also pulled out the transmission, give it a rinse and a general tighten up, and just about to bolt it onto the engine and have much easier access to the converter bolts. Loctite this time! then i'll put the complete unit back in one piece.
about 25 years ago I saw an article in the uk, where a freight company running ford transits, made a conversion. the radiator, engine and gearbox was mounted on a frame, that slid in the front of the van on rails and bolted into place, reckoned a complete change out took 1/2 an hour, and any repairs could be done on a bench. you would have thought that that method would also be quicker and easier when building the vans in the first place. make em easier to fix
johnno the pirate is offline   Reply With Quote
The Following 2 Users Say Thank You to johnno the pirate For This Useful Post:
GaryJ (07-10-2015), jaahn (07-10-2015)

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.