Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter-Based RV Brands > Thor

Thor Chateau Citation, Four Winds Siesta


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-13-2019, 02:54 AM   #1
tedcapra
 
Join Date: Mar 2019
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default Trailer Brake Controller Install

I have a 2019 Thor Sprinter 24SK. it does not have a MB 7 pin wiring harness but it does have one installed by Thor. I have no information as to where the other ends are so i can install a trailer brake controller. while digging around i did find a blue wire loose laying in the battery box under the driver floorboard. the red wire that adjoins it has a 30AMP fuse and it runs to the 7 pin connector.

I feel confident that the blue wire activates my trailer brakes and goes to the blue wire on the brake controller. i will splice into the 30amp fuse red wire and run it to the black positive wire on the controller. the white wire will be grounded off the battery terminal and the black wire of the controller will go to the brake light switch under the dash.

i attached pics

any thoughts, anything i have missed??
Attached Images
File Type: jpg blue wire.jpg (41.1 KB, 56 views)
File Type: jpg red wire.jpg (86.3 KB, 50 views)
File Type: jpg brown and yellow wires.jpg (106.3 KB, 52 views)

Last edited by tedcapra; 04-13-2019 at 02:58 AM.
tedcapra is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.