Sprinter-Forum    
 

Go Back   Sprinter-Forum > General Forums > Sprinter Talk

Sprinter Talk General discussion about anything and everything about Sprinters.
Discussion: Scanners


Reply
 
Thread Tools Display Modes
Old 07-14-2018, 06:39 AM   #1
masterykonedy
 
Join Date: May 2018
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Initial Testing

To find out which group you have, test by turning on the interior light , turn the key if the light goes out it is the first group Battery and Charging system.

If the light stays on, next test by running a wire from the small terminal on the starter.
To do this you should make up a test lead. Get a 2m or 8 feet length of hook-up wire. Connect a small alligator clip to each end. Connect one clip to the small terminal on the starter and the other end to a multimeter lead. The other meter lead must go to earth (ground/negative). The seat mounting bolts are a good earth.

With the meter resting on the seat and switched to 20 volts DC, turn the key. If the meter reads 12 volts you have good security (SKREEM) and relays circuit so go to the third group. If you do not get the 12 volts the problem is in the second group, Security and Relays.
masterykonedy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 05:09 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.