Sprinter-Forum    
 

Go Back   Sprinter-Forum > Classifieds > For Sale (Sprinter vans Only)

For Sale (Sprinter vans Only) Post Sprinter Vans for sale here. Vans must be driveable, otherwise, they go to the parts section here.


 
Thread Tools Display Modes
Old 02-06-2020, 09:32 PM   #1
hrr43
 
Join Date: Jan 2019
Location: Los Angeles, CA
Posts: 48
Thanks: 8
Thanked 4 Times in 4 Posts
Default 2014 Sprinter 170 - partially built; Los Angeles, CA

Considering selling my 2014 Sprinter 170 (34k miles) mid-way through my build given changing life circumstances. This is a blank canvas for anyone looking to focus on the interior design as I've already done all the legwork with electrical, insulation, walls, flooring, etc

I've easily put hundreds of hours into this build already

Here's what I've invested/installed in the van so far:

Exterior
-Aluminess rear bumper + deluxe box (w/ rotopax emergency diesel can) + shelf + rigid flush mount lights ($4300)
-Aluminess front brush guard ($750)
-Flarespace flares with black gel coat- ext on driver side, regular with CRL half slider on passenger side ($2200)
-52" front light bar and side/rear party lights
-Vantech roof rails ($300)
-Method MR301 wheels x 5 ($1000)
-Falken Wildepeak tires x 5, <2k miles on them ($900)
-CRL T Vent window ($500)

Interior
-Quest overland window covers for the whole van (>$1000)
-Havelock wool 60lb bags x 3 ($1000)
-Lumber incl 1/4" birch ply for walls/ceiling, furring strips for horizontal studs and floor grid, 1/2" baltic birch ply for sub floor (~$1000)
-Two brand new leather front seats ($600)

Appliances
-Espar D2L (2019 model) installed with easy start pro controller ($1200)
-Maxxair 7500k Fan installed ($300)
-Dometix CFX75DZW ($1000)
-Bosch 8 gal water heater ($200)

Electrical system (alternator charger, batteries, simarine, fan, heater already connected, all wires run)
-wires, crimps, connectors, etc (~$500) -- van is wired for top of the line setup with 120v AC and 12v DC system
-Outback Flexmax FM80 MPPT charge controller (https://www.wholesalesolar.com/35106...rge-controller Retail $515)
-Outback VFXR2812A pure sine inverter charger (https://www.wholesalesolar.com/25505...2812a-inverter retail $2175)
-Outback Mate3s inverter/charge controller remote control and data logging (https://www.wholesalesolar.com/95787...k-power-mate3s retail $437)
-Outback Hub 4 (https://www.wholesalesolar.com/95002...-outback-power retail $152)
-Simarine Pico (https://www.simarine.net/product/pico-battery-monitor/) with SC301 Shunt (https://www.simarine.net/product/sc3...digital-shunt/) and SCQ25 Digital Shunt Module (https://www.simarine.net/product/scq...-shunt-module/) (retail is around $500 for all of this...hard to find..more info here https://faroutride.com/simarine-pico/)
-Sterling BB1260 (https://www.sterling-power-usa.com/S...rycharger.aspx retail $425)
-3x Relion RB100 batteries (https://relionbattery.com/products/lithium/rb100 retail $1050 each)
-Blue Sea 8023 DC panel (https://www.bluesea.com/products/802..._-_8_Positions, retail $290)
-Blue Sea 8689 battery management panel..use this for shutting off batteries, solar in/out, alternator out, etc (https://www.bluesea.com/products/868...nagement_Panel, retail $400)
-Blue Sea 9088 AC panel with main (https://www.bluesea.com/products/809...2B_4_Positions, retail $240)
-Total composites floor heating pads x 2 (~$500)
-Renogy 160watt panels x 2 (~$350)

This is ~$25k worth of components not factoring in the cost/time to install a lot of it (as well as sales tax). The van is ready for someone to create their own interior design or use it as a fully insulated empty box with a functional heater/electrical system while they figure out what to do with it.

Asking $60k or best offer for van with components

reach out for more pics













Last edited by hrr43; 02-11-2020 at 01:43 AM.
hrr43 is offline   Reply With Quote
The Following User Says Thank You to hrr43 For This Useful Post:
Surveillance Van (02-06-2020)
Old 02-11-2020, 04:37 PM   #2
hrr43
 
Join Date: Jan 2019
Location: Los Angeles, CA
Posts: 48
Thanks: 8
Thanked 4 Times in 4 Posts
Default Re: 2014 Sprinter 170 - partially built; Los Angeles, CA

Can throw in some dewalt tools if the buyer is interested (track saw, electric staple gun, jig saw). Also have all the supplies to finish the electrical system (crimps, terminal rings, disconnects, etc)
hrr43 is offline   Reply With Quote
Old 02-12-2020, 05:35 PM   #3
hrr43
 
Join Date: Jan 2019
Location: Los Angeles, CA
Posts: 48
Thanks: 8
Thanked 4 Times in 4 Posts
Default Re: 2014 Sprinter 170 - partially built; Los Angeles, CA

Also should've mentioned the title is clean
hrr43 is offline   Reply With Quote
Old 02-14-2020, 10:32 PM   #4
WannaSprint
 
Join Date: May 2019
Location: Lexington, KY
Posts: 48
Thanks: 49
Thanked 12 Times in 6 Posts
Default Re: 2014 Sprinter 170 - partially built; Los Angeles, CA

Your pix didn't aren't showing

Sent from my Pixel 3 XL using Tapatalk
WannaSprint is offline   Reply With Quote
Old 02-16-2020, 02:59 PM   #5
hrr43
 
Join Date: Jan 2019
Location: Los Angeles, CA
Posts: 48
Thanks: 8
Thanked 4 Times in 4 Posts
Default Re: 2014 Sprinter 170 - partially built; Los Angeles, CA

Weird. They work for me when I click them. Feel free to text me and I can send them 51zero-7two5-one7zero9
hrr43 is offline   Reply With Quote
Old 02-16-2020, 03:25 PM   #6
Onefin
 
Join Date: Mar 2013
Location: Telluride, CO
Posts: 1,194
Thanks: 714
Thanked 513 Times in 358 Posts
Default Re: 2014 Sprinter 170 - partially built; Los Angeles, CA

Pictures work for me as well.
Onefin is online now   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 07:19 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.