Injector Return line Routing and Leaks - Solved

I’ve replaced the return fuel lines because I noticed fuel around the front two injectors. I looked again today and I’m still getting some fuel seeping out. Here’s my guess from where. But the return line is wet with fuel also. And expert advice?

IMG_7399.jpg



Sent from my iPhone using Tapatalk
 
I replaced it with the MB oem return line because I thought the problem was getting the correct size o-ring. I’m still monitoring it but so far so good. I tried two different return lines from Europarts-sd and no luck with them. IMG_7938.jpg


Sent from my iPhone using Tapatalk
 

Trimmerdhd

TrimmerDHD
Was he able to connect on to the existing line as it leaves injector#5 so you don't have to get to the banjo connection under the manifold?
 

Top Bottom