Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter RV's & Conversions Write-Ups


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-26-2013, 08:23 PM   #1
hein
Mech. Engineer CAD/CNC
 
Join Date: Jan 2011
Location: PacNW
Posts: 1,838
Thanks: 1,149
Thanked 1,280 Times in 753 Posts
Default 2010 3500 RV build



Introduction
We purchased this van used in the fall of 2012 with the intention of converting it to an fully equipped RV. Plus we had a business goal of discovering and developing products to offer to fellow DIY van upfitters. I joined and had been reading and learning from this forum for about a year prior.

When we became new owners, the van had already been up-fitted with CR Laurence windows and interior panels. The interior has a thin plywood (luan?) backing. The walls are laminated with thin black rubber sheet about 24" up from the floor. From there up and on the ceiling it's padded and upholstered with interweave fabric. The interior looks nice and is one of the primary reasons we bought this van. The factory floor was covered with a black rubber mat. There is a forward vent fan and rear vent in the roof and some LED ceiling lights. The previous owner had fabricated a two level elevated bed frame out of steel thinwall square tubing with plywood panels. It was self supporting and loosely attached to the walls with sheetmetal screws. I removed all that and cut it up to use as materials in the build.

The interior panels had been done by Van Specialties in Portland. It's nice to have a professionally done interior as a basis for our conversion. All the interior panels and the floor have since been removed to add wiring, upgraded insulation, more accessories, etc. We sealed all exposed plywood on the backs of the panels with 2 coats of odorless water based polyurethane. It took all of a gallon. I don't care for 'plywood' smell and this really helps reduce it. The wall panels are set aside and will be modified and reinstalled later.

Getting Started
One of the first things I wanted to do was paint the seat pedestals. White is great on the outside. But not so much for interior parts, imo.



I removed the pedestals to do some wiring and to put a sub amp under the passenger seat. While they were out, I cleaned them with a Scotch Brite pad and sprayed the outside with Rustoleum multicolor textured paint in the color 'Aged Iron'. This finish will be used through out the interior.

So with that done, the rest of the conversion can begin. The design was completed in 3D CAD as the project progressed.
Pdf document showing the layout and list of major components

Our thanks:
We wish to thank everyone for all the positive and constructive compliments, comments and feedback. And this forum for making that possible. And a huge Thank You to our customers for supporting us. We hope you find some useful information that will allow you to complete and enjoy your van. Feel free to contact us at your convenience.

Thank you,
Hein & Kim
Impact, Inc.
Hood River, OR
54l 49O 5O98

Notes:

1. This thread contains links to (most) all the supplies and components used, including fasteners and other doo/dads. If you can't find it, PM me.

2. Best way to find something specific is to use the Search Function. Easiest way is to PM me and I'll send you a link.

3. All of the fabricated components are defined by 3D CAD models/drawings/CNC paths so can be produced again. PM me if you are interested in a specific component. Some are already available via the following links:

Ebay Store: http://www.ebay.com/sch/impactproducts/m.html

Ford Transit build: http://www.fordtransitusaforum.com/c...-r-d-work.html

We also own DIYvan.com
__________________
2010 MB 3500 RV conversion.

Last edited by hein; 04-27-2017 at 03:38 PM. Reason: Update
hein is offline   Reply With Quote
The Following 7 Users Say Thank You to hein For This Useful Post:
Camrewop (01-06-2016), gtobey (07-07-2015), HighPockets (02-20-2017), Neil2 (04-28-2014), rascorp (12-13-2013), This Old Light (05-07-2016), tommyt (12-05-2013)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 02:43 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.