Scottmx426
Scottmx426
To avoid the finicky stock clips, does anyone have a link to the reusable hose clamps for the fuel filter supply and discharge lines for the fuel filter on OM651 w/ five prong plug? Thanks in advance.
I thought I posted it in the NCV3 database (for part numbers, references) section. Which section is most appropriate for parts? Anyway, thanks for the reply. Looking for the screw type clamps in North America.Hi there, this is a question best posted the NCV3 Section.
Thanks mike. That site is great. Ordered a bunch of extra stuff too. Stock up on clamps, sealsI would (actually, did for my OM 642) look on https://europarts-sd.com/ they probably have the right size
I am going to try these for my fuel filter replacement.To avoid the finicky stock clips, does anyone have a link to the reusable hose clamps for the fuel filter supply and discharge lines for the fuel filter on OM651 w/ five prong plug? Thanks in advance.
I run the valvoline that meets BEVO 229.51 that goes on sale at the NAPA every once and a while and change my own. Since I live in coastal Virginia and drive an RV I see 100 F to mid teens for temps so don't have a seasonal difference.Thanks mike. That site is great. Ordered a bunch of extra stuff too. Stock up on clamps, seals
And filters.
Ps. What oil are you running winter and summer?
Thanks Mike for the link, i have been meaning to purchase the pliers.If you get a proper tool, the oem clamps can be used again, and the task is simple
https://www.amazon.com/dp/B00MA0KBXE/ref=sspa_dk_hqp_detail_aax_0?psc=1
After using the reusable clips with pliers , I can say it's a difficulty to use . Not always easy to adjust pliers to the right angle to remove & reset . I've switched over to the screw down method as suggested by " Scottmx426 " awhile ago . Thanks for sharing photo .$2.40 in parts and you can use a tool you already own.