Horn connector

D

Dclowd9901

New member
Just bought A6395400076 to replace the OEM horn, and found that, at some point, a previous owner had already replaced the horn with a non OEM horn, so I don't have the OEM connector this replacement horn presumes I have.

Does anyone have any clue what connector goes to this horn? image attached
 

Attachments

autostaretx

autostaretx

Erratic Member
You might try sending a private message to member MillionMileSprinter ... he has a bunch of "wrecks" he can pull oddball parts from

--dick
 
SSTraveler

SSTraveler

2014 LTV Unity Murphy Bed
A Treble plug, https://www.aliexpress.com/item/2-P...ring-dial-plug-connector-for/32812512310.html. This one from Amazon looks the same https://www.amazon.com/MUYI-Waterpr...989570&sr=8-3&keywords=2+pin+female+connector. Amazon has quite a few choices https://www.amazon.com/s/ref=nb_sb_...in+Way+16+AWG+Waterproof+Connector+Wire+1.5mm. I didn't look at Ebay but you can probably find there as well.

I replaced my horn but did not cut the MB plug off to do it. I made connectors that worked with the plug so I could leave it in place in case I ever sold it. I didn't want new owners to have the same issue that you have.
 
Last edited:
D

Dclowd9901

New member
SSTraveler said:
A Treble plug, https://www.aliexpress.com/item/2-P...ring-dial-plug-connector-for/32812512310.html. This one from Amazon looks the same https://www.amazon.com/MUYI-Waterpr...989570&sr=8-3&keywords=2+pin+female+connector. Amazon has quite a few choices https://www.amazon.com/s/ref=nb_sb_...in+Way+16+AWG+Waterproof+Connector+Wire+1.5mm. I didn't look at Ebay but you can probably find there as well.

I replaced my horn but did not cut the MB plug off to do it. I made connectors that worked with the plug so I could leave it in place in case I ever sold it. I didn't want new owners to have the same issue that you have.
Click to expand...
I’m not sure those are the same. If you note the connection in the picture I posted, it seems to have a small notch on one side of the opening.
 
SSTraveler

SSTraveler

2014 LTV Unity Murphy Bed
You might be able to modify with a dremel tool or grinder. Or just buy the separate pin connectors, https://www.amazon.com/dp/B075RHZNB...ae61-b100dea5fc61&ie=UTF8&qid=1534020942&sr=2 or https://www.amazon.com/Hilitchi-800...qid=1534021040&sr=8-6&keywords=pin+connectors, and make the connector you need with electrical tape or hot glue. Them wrap the connection with Xtreme tape, https://www.amazon.com/X-Treme-Tape...34021266&sr=8-2&keywords=xtreme+tape+silicone, to waterproof it and your in business.
 
Last edited:
D

Deleted member 50714

Guest
Use the search function, the connector is available.
 
D

Dclowd9901

New member
SSTraveler said:
You might be able to modify with a dremel tool or grinder. Or just buy the separate pin connectors, https://www.amazon.com/dp/B075RHZNB...ae61-b100dea5fc61&ie=UTF8&qid=1534020942&sr=2 or https://www.amazon.com/Hilitchi-800...qid=1534021040&sr=8-6&keywords=pin+connectors, and make the connector you need with electrical tape or hot glue. Them wrap the connection with Xtreme tape, https://www.amazon.com/X-Treme-Tape...34021266&sr=8-2&keywords=xtreme+tape+silicone, to waterproof it and your in business.
Click to expand...
Great idea. I’ll give this another earnest search and probably use your approach because this connector seems to be absolute unobtainium.
 
D

Deleted member 50714

Guest
Dclowd9901 said:
Thank you for the helpful comment but if it were that easy, I suspect you could have simply pointed me to the answer. I’ve looked; could not find.
Click to expand...
Here ya go kind sir, easy peezy. My apologies for the delay, busy spoon feeding others. (sorry, just can't restrain myself).

DougE said:
I installed dual horns from a Chevy Silverado. ACDELCO D1970F. The support for the original horn was about an inch too short so replaced it with some bar stock. The bracket I made and the bracket that came with the horn were both bent to get the assembly close to the radiator. Nothing rubs. The sprinter horn connector turned out to be a Metri-Pack 280 (I source from Del City). The Silverado connector wasn't quite right so I trimmed the housing and pins, and sealed the stub with liquid tape. I tapped into the wiring between the two horns and used #16 wire for my extension to the existing sprinter connector. I oriented the horns to best prevent water intrusion.

Click to expand...
 

Attachments

Last edited by a moderator:
SSTraveler

SSTraveler

2014 LTV Unity Murphy Bed
Looks like somebody spoon feed you. So you can read others posts, copy and paste! Dclowd9901 needed the answer 3 weeks ago!
 
You must log in or register to reply here.

Top Bottom