Sprinter-Forum    
 

Go Back   Sprinter-Forum > Regional Discussions > Australia, New Zealand, and Asia Pacific


 
Thread Tools Display Modes
Old 02-18-2019, 07:08 AM   #11
Sockeye770
 
Join Date: Jul 2014
Location: Ferntree Gully, Vic
Posts: 294
Thanks: 27
Thanked 74 Times in 63 Posts
Default Re: Drivers Side Window Motor Mechanism Failure

Quote:
Originally Posted by Sockeye770 View Post
If a new replacement plastic part can be purchased cheaply, then I would buy it and fit it, as it should last another 12+ years.
On further searching, a new replacement plastic slider appears to be out of the question, unless someone has 3D printer with the right plastic for durability and a fleabay add.
So a home fabricated soft aluminium (or chopping board plastic) slider seams to be the best fix.
Sockeye770 is offline   Reply With Quote
Old 02-18-2019, 10:28 AM   #12
PeterInSa
 
Join Date: Feb 2009
Posts: 495
Thanks: 180
Thanked 74 Times in 66 Posts
Default Re: Drivers Side Window Motor Mechanism Failure

SK770, On one of the Threads I researched, someone made a 3D version that only lasted 3 months, I think the best alternative suggested was some form of Plastersine/Araldite I think in the US its called JD alloy or similar, you protect the slide and the arm with tissue paper and mold this stuff similar to the original, in situ that hardens. The AL slide was considered to be 2nd best/easiest.

Peter
PeterInSa is offline   Reply With Quote
Old 02-18-2019, 06:46 PM   #13
autostaretx
Erratic Member
 
autostaretx's Avatar
 
Join Date: Sep 2006
Location: Seattle
Posts: 15,311
Thanks: 2,634
Thanked 6,595 Times in 4,850 Posts
Default Re: Drivers Side Window Motor Mechanism Failure

There are many threads in the forum by people who have successfully replaced the window regulator's slider/roller by a shower door roller purchase from hardware stores (Home Depot is the usual source in the US).

The wheel requires a slight re-working, but once accomplished, it's a successful long-term fix.

Here are the main threads:
https://sprinter-source.com/forum/sh...ad.php?t=16098
https://sprinter-source.com/forum/sh...ad.php?t=14821

--dick
__________________
2005 T1N 118" Freightliner 2500 Passenger Wagon (2.7L, 15" tires, standard (short) roof)
Get YOUR Sprinter's full configuration datacard by entering your VIN to https://www.datamb.com/
http://diysprinter.co.uk/reference <-- lots of service documentation, Thanks to Jens Moller and Arnie_Oli
((as always: this post may go through a couple of post-posting edits... so maybe give it ten minutes before commenting))

Last edited by autostaretx; 02-18-2019 at 07:09 PM.
autostaretx is online now   Reply With Quote
The Following User Says Thank You to autostaretx For This Useful Post:
hoosierrun (02-18-2019)
Old 02-19-2019, 03:38 PM   #14
Midwestdrifter
 
Join Date: Sep 2013
Location: Roaming Out West for a While
Posts: 7,768
Thanks: 1,406
Thanked 5,195 Times in 3,245 Posts
Default Re: Drivers Side Window Motor Mechanism Failure

The manual window regulator does not have the same weakness. So if desired, you could source a manual window drive/regulator. I am not certain if the door card/panel needs replaced. Though you could likely just drill a hole in your old on if needed.
__________________
2004 T1N | Overland Conversion in Process Completed...For now... | 101,000 118,XXX 137,078 165,000 miles | 140" | High Roof | My Build Thread
Another Random Blog | http://VagariesAbound.blogspot.com
Midwestdrifter is online now   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.