Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter-Based RV Brands > Airstream > Sprinter Westfalia


 
Thread Tools Display Modes
Old 10-20-2018, 08:39 PM   #51
Adolphus
 
Join Date: Apr 2017
Location: Texas
Posts: 72
Thanks: 10
Thanked 7 Times in 7 Posts
Default Re: No turning back now

My pull out shower hose stuck again! This time it won’t happen again. I had already moved the hose clamp to give the largest curling radius, but still stuck when trying to push it back in. This time I adjusted the hoses and cut a small access hole that allows future hose jam corrections without taking off the sink (again). Also fixed a kink in the cold water supply while I was at it by using the heat gun to soften it and then made round again and wrapped it with heavy duty tape. Then chamfered the cabinet to round the inside edge so it wouldn’t compress the hose again.
Adolphus is offline   Reply With Quote
Old 11-01-2018, 06:13 PM   #52
Adolphus
 
Join Date: Apr 2017
Location: Texas
Posts: 72
Thanks: 10
Thanked 7 Times in 7 Posts
Default Re: No turning back now

Generator/rack completed. The challenge had been to adjust generator height so the adjacent fiamma rack functions properly for two bikes and still have adequate room for the license plate bracket to be welded to the base of the generator rack. All’s well and enough room for all. Next task is to secure a 120V flexible cable from the transfer switch through one of the now unused original license plate light holes and weatherproof it. Trying to decide on whether to build a box around the generator for traveling or just a Sunbrella fabric cover.
Attached Images
File Type: jpg 5D6B574F-B0D0-4B82-9905-46ED4F7FC49C.jpg (230.0 KB, 45 views)
File Type: jpg F9FCB83B-854C-4A5E-9CC6-4F6DE64CD76A.jpg (184.7 KB, 43 views)

Last edited by Adolphus; 11-01-2018 at 06:42 PM.
Adolphus is offline   Reply With Quote
Old 11-01-2018, 09:28 PM   #53
Riptide
 
Riptide's Avatar
 
Join Date: Mar 2009
Location: CT
Posts: 271
Thanks: 56
Thanked 70 Times in 40 Posts
Default Re: No turning back now

I was going to suggest an Aluminess box, which are sized for the Honda generators, but I don't think the rack will clear the box when the rack has bikes on it...

They call it a Galley Box: https://www.aluminess.com/accessories/boxes/ But you could probably get something similar made locally, cheaper, that would hug the generator closer...
Riptide is online now   Reply With Quote
Old 11-01-2018, 11:29 PM   #54
Adolphus
 
Join Date: Apr 2017
Location: Texas
Posts: 72
Thanks: 10
Thanked 7 Times in 7 Posts
Default Re: No turning back now

I’m leaning toward fabricating it out of lightweight plywood since I don’t need extra security beyond the lowpro lockdown plate, but if I go the box route then I’ve got to think through whether I use a fan or just keep open to airflow with doors. I seem to remember someone recommend 500 cfm however most high velocity bathroom fans only reach 150. The other option is possibly two granger 100 cfm fans that would be 36W total if that would be the ticket. Any thoughts?

Last edited by Adolphus; 11-02-2018 at 04:49 AM.
Adolphus is offline   Reply With Quote
Old 11-02-2018, 09:53 PM   #55
Adolphus
 
Join Date: Apr 2017
Location: Texas
Posts: 72
Thanks: 10
Thanked 7 Times in 7 Posts
Default Re: No turning back now

Right original license plate light location turns out to be perfect for running the 120V connection from the transfer switch through the door to the generator.
Attached Images
File Type: jpg 395FA374-118B-40F5-B114-8FB8A1F8E1D8.jpg (135.4 KB, 37 views)
File Type: jpg 430E3DD7-A8BF-41CC-8781-E7421875DBA0.jpg (80.8 KB, 36 views)
Adolphus is offline   Reply With Quote
Old 11-07-2018, 05:38 PM   #56
Pnwsquid
 
Join Date: Aug 2015
Posts: 123
Thanks: 55
Thanked 32 Times in 23 Posts
Default Re: No turning back now

Quote:
Originally Posted by Adolphus View Post
I’m leaning toward fabricating it out of lightweight plywood since I don’t need extra security beyond the lowpro lockdown plate, but if I go the box route then I’ve got to think through whether I use a fan or just keep open to airflow with doors. I seem to remember someone recommend 500 cfm however most high velocity bathroom fans only reach 150. The other option is possibly two granger 100 cfm fans that would be 36W total if that would be the ticket. Any thoughts?
Did you read my post in the 5th page? Regardless of what you do, if it's running in a box even with a fan you need to worry about the heat created from the exhaust. I'd recommend insulating and routing it separately as an exit from the box. I used waterproof boat access holes to gain entry to the top and both sides.
Pnwsquid is offline   Reply With Quote
Old 11-07-2018, 06:03 PM   #57
Adolphus
 
Join Date: Apr 2017
Location: Texas
Posts: 72
Thanks: 10
Thanked 7 Times in 7 Posts
Default Re: No turning back now

Would you please provide some pics of your box setup? I’m not sure what the boat hull covers are and would like your source for the 500cfm fan you chose. Thanks!
Adolphus is offline   Reply With Quote
Old 11-09-2018, 05:16 AM   #58
OldWest
T1N Westfalia
 
Join Date: Jul 2009
Posts: 1,725
Thanks: 146
Thanked 473 Times in 361 Posts
Default Re: No turning back now

This thread has a nice generator box. Looks like it has plenty of ventilation with grate floor and wall vents. Looks like controls are easily accessible.

https://sprinter-source.com/forum/sh...ad.php?t=57457

Some other links to boxes:

https://sprinter-source.com/forum/sh...=Generator+box

Autocamp's box:

http://eat-drink-men-women.blogspot....rt-21.html?m=1

Last edited by OldWest; 11-09-2018 at 05:36 AM. Reason: Add lonks.
OldWest is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 12:46 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.