Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter-Based RV Brands > Leisure Travel Vans > Unity


 
Thread Tools Display Modes
Old 09-19-2019, 12:42 PM   #11
aarpskier
2017 LTV Unity FX
 
Join Date: Oct 2016
Location: Rockford, MI
Posts: 557
Thanks: 167
Thanked 492 Times in 233 Posts
Default Re: fuse to stop co detector alarm

Quote:
Originally Posted by autostaretx View Post
... which probably means that the switch at least requires 3 wires:
one for the positive feed from the battery
one for the positive feed onward to the CO detector
...and the third going to "ground" (or negative) to allow the "lit red dot" to operate.

---dick
I actually count the switch interruption of the positive lead as one wire. However, your statement as to the ground is certainly true. Which means once again that my memory is not what it used to be. Either:

1) I don't remember hooking up a ground wire; or

2) I didn't hook up a ground wire and mis-remember the light being on.

I will check the next time I am in the coach. In any event, there are plenty of accessible ground wire sources behind the panel to the left of the entrance steps.
aarpskier is offline   Reply With Quote
Old 09-20-2019, 12:39 AM   #12
aarpskier
2017 LTV Unity FX
 
Join Date: Oct 2016
Location: Rockford, MI
Posts: 557
Thanks: 167
Thanked 492 Times in 233 Posts
Default Re: fuse to stop co detector alarm

Quote:
Originally Posted by aarpskier View Post
... once again ... my memory is not what it used to be. Either:

2) I didn't hook up a ground wire and mis-remember the light being on.
No red light, so I did not hook up a ground wire. Not needed, however. Up is "on" and green light on detector, an inch away, starts blinking. Down is "off", and solid green light on detector goes off. I guess I decided I didn't need the "Christmas effect!"
aarpskier is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 03:44 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.