Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter-Based RV Brands > Leisure Travel Vans > Serenity

Thread Tools Display Modes
Old 09-13-2017, 04:58 PM   #1
Join Date: Sep 2017
Posts: 11
Thanks: 0
Thanked 2 Times in 2 Posts
Default LED Gooseneck Reading Lights to Corner Bed model

This mod is equally applicable to all Serenities/Liberos and maybe even Unities (CB or FX models). The rear LED lights over our corner bed are nice ambience, but not really suitable as bedtime reading lights. I installed Gooseneck LED's in my Rialta, and have now found the same ones five years later to install in my Libero.

To have unswitched lights (they have their own local switches) you need to run a new always-on power and ground wire under the "floors" of the ceiling cabinets. In my case I chose to run from the back of the Winegard power and antenna amplifier plate that is on the forward wall of the bed area. A couple of holes needed to be drilled, and the wire fished 1/ at the very front of the forward ceiling cabinet, and 2/ around the corner at the back cabinet. (the holes and wire feed are at the bottom of the cabinet walls, so invisible once the "floor panels" are screwed back on). Pics show the power source (back of winegard amp), the wire runs, and finished view of the two gooseneck lights.

08 Libero
Delta, BC
Bertible is offline   Reply With Quote
Old 11-27-2017, 11:03 PM   #2
Custom User Title
israndy's Avatar
Join Date: Nov 2009
Location: Alameda, CA
Posts: 1,791
Thanks: 371
Thanked 507 Times in 375 Posts
Default Re: LED Gooseneck Reading Lights to Corner Bed model

I am inspired! Think I will use the ones that LTV is currently installing in mine however

T1N 2005 3500 based 2007 Leisure Travel Van's Serenity
Also a 40' Airstream Sky Deck, a 1999 Jeep Grand Cherokee, 2000 Honda Hybrid Insight, new 2013 Volvo C70 hardtop convertible
And all electric: a 2012 Mitsubishi i-Miev and two 2007 Vectrix VX1 motorcycles, my other car is a Tesla Model 3 (being built as of 2/22/18)
israndy is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 02:11 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.