Go Back   Sprinter-Forum > VS30 Sprinters > VS30 Write-Ups

VS30 Write-Ups Help other VS30 owners by posting your experience working on your Sprinter.

Thread Tools Display Modes
Old 12-25-2018, 06:02 AM   #1
Eric Experience
Eric Experience's Avatar
Join Date: Aug 2008
Location: Victoria Australia
Posts: 2,998
Thanks: 114
Thanked 1,657 Times in 1,093 Posts
Default OK I will make a start

I am more interested in the possible 4x4 options. Looking under the FWD I could see double wish bones and coil springs. First thought this is good but the steering rack is behind the diff, right were the pinion would have to go. The fuel tank is across the front where you would put the transfer case. On the plus side the front wheels are stronger and wider.

The RWD is very similar to the early models and would most likely take the existing running gear.
If we had access to the parts bin we could use a mixture of FWD and RWD hardware to make up a front end with better ground clearance. The low floor level would make it hard to place a decent fuel tank.
Eric Experience is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 03:28 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.