Sprinter-Forum    
 

Go Back   Sprinter-Forum > VS30 Sprinters > VS30 Write-Ups

VS30 Write-Ups Help other VS30 owners by posting your experience working on your Sprinter.


 
Thread Tools Display Modes
Old 01-23-2019, 10:15 PM   #1
stevesvans
 
Join Date: Aug 2018
Location: Seattle
Posts: 36
Thanks: 47
Thanked 14 Times in 2 Posts
Default How to remove the rear door panel and inner handle

Nearly everything aft of the cab is supposed to be the same from the NCV3 to the VS30 but one thing isn't: how to remove the rear door inner handle so you can get the panel off. So here's a write-up after figuring it out on my 2019 144.

My van has the cargo panels option in the entire interior but I assume the rear door panel is the same for all. The panel is held in place with those plastic thingys you pop out with a trim panel remover tool. But the panel can't be removed without removing the door handle.

The new handle is a solid unit, the trim part you see is not separate. Here's how you get if off:

1) Remove all the panel trim clips

2) Rotate the panel 90 degrees and push it upwards until you get a gap at the top of the door handle unit (sorry, no pic)

3) Right in the middle of the unit is a small lever that you push or pull so you can slide the whole door handle unit to the left and then it pops out (see pic)

4) That's it, you're done. Do the opposite to re-install.

Hope this helps someone.
Attached Images
File Type: jpg Overview showing location.jpg (89.4 KB, 190 views)
File Type: jpg Plastic lever release.jpg (75.7 KB, 180 views)
stevesvans is offline   Reply With Quote
The Following 13 Users Say Thank You to stevesvans For This Useful Post:
AndyMAC (09-03-2019), autostaretx (01-23-2019), cacaw (05-22-2019), Dendisch (07-18-2019), dynaco1 (02-19-2019), Gski (06-01-2019), Notfamous (05-21-2019), Onefin (Today), ptheland (01-23-2019), pvmann (02-25-2019), sailquik (01-25-2019), slamit (01-31-2019), Wreckingcrewsdad (05-25-2019)
Old Yesterday, 08:50 PM   #2
14dayweek
 
Join Date: May 2019
Location: Alberta, Canada
Posts: 10
Thanks: 10
Thanked 3 Times in 2 Posts
Default Re: How to remove the rear door panel and inner handle

Thanks for the response. I just didnít want to wreck anything under the plastic.
Attached Images
File Type: jpg image.jpg (54.6 KB, 16 views)
14dayweek is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.