Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter-Based RV Brands > Roadtrek

Thread Tools Display Modes
Old 04-23-2019, 03:27 AM   #1
Join Date: Nov 2018
Location: Loveland, CO
Posts: 4
Thanks: 1
Thanked 0 Times in 0 Posts
Default Voltstart

Roadtrek publishes two ways to engage the voltstart on the CS Adventurous. They both provide five starts that last about 30 minutes each. Both say to push the voltstart button, close and lock the doors and walk away. One of the instructions says you need to use the remote start after locking doors to engage the voltstart, which will use one of the 5 starts. The second set of instructions does not require the remote start.

I even asked a Roadtrek tech, before they went under, and he couldn’t answer the question.
Does anyone know which way is correct?

oldelkhunter is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 03:46 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.