Sprinter-Forum    
 

Go Back   Sprinter-Forum > General Forums > Sprinter Talk > Scanners


 
Thread Tools Display Modes
Old 02-12-2019, 01:50 PM   #21
damien89
 
Join Date: Mar 2009
Posts: 80
Thanks: 30
Thanked 8 Times in 8 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

Quote:
Originally Posted by CalicoJack View Post
damien89

Have you had any luck with this?

I have the same issue with my 2016 316 4x4 sprinter.

I have tried switching the SG to different protocols with no success. The same SG works perfectly on my other car

Cheers,
Jim
No, i havent managed to get it to work, i even checked the obd wiring with an ohm meter and it measured 60 ohms so the wiring is good. I'm at a loss on what to try next.
__________________
2017 Sprinter 516cdi OM 651 7G-Tronic LWB 'LongTail'
damien89 is offline   Reply With Quote
The Following User Says Thank You to damien89 For This Useful Post:
CalicoJack (02-20-2019)
Old 02-20-2019, 10:34 AM   #22
CalicoJack
 
Join Date: Sep 2017
Posts: 56
Thanks: 16
Thanked 4 Times in 4 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

Hmmm that's a shame. I can only imagine that MB have made a tweak to the protocol which the scanguage doesn't pickup

Anyone had success with other OBD2 devices on a 16+ sprinter?
CalicoJack is offline   Reply With Quote
Old 02-20-2019, 05:43 PM   #23
autostaretx
Erratic Member
 
autostaretx's Avatar
 
Join Date: Sep 2006
Location: Seattle
Posts: 16,236
Thanks: 2,846
Thanked 7,166 Times in 5,253 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

I'd certainly try yanking LinearLogic's chain on this (again) .... if MB can create a vehicle that the ScanGauge won't connect to, that may also occur on other models in their line.

(try to) Convince LinearLogic to go find a 2016 Sprinter on their own (dealer's lot?) and get it to connect.

--dick
__________________
2005 T1N 118" Freightliner 2500 Passenger Wagon (2.7L, 15" tires, standard (short) roof)
Get YOUR Sprinter's full configuration datacard by entering your VIN to https://www.datamb.com/
http://diysprinter.co.uk/reference <-- lots of service documentation, Thanks to Jens Moller and Arnie_Oli
((as always: this post may go through a couple of post-posting edits... so maybe give it ten minutes before commenting))
autostaretx is offline   Reply With Quote
Old 02-24-2019, 01:40 PM   #24
damien89
 
Join Date: Mar 2009
Posts: 80
Thanks: 30
Thanked 8 Times in 8 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

Quote:
Originally Posted by CalicoJack View Post
Hmmm that's a shame. I can only imagine that MB have made a tweak to the protocol which the scanguage doesn't pickup

Anyone had success with other OBD2 devices on a 16+ sprinter?
I have tried 2 other devices, an ultra gauge and an obd link mx wifi dongle, both failed to connect/
__________________
2017 Sprinter 516cdi OM 651 7G-Tronic LWB 'LongTail'
damien89 is offline   Reply With Quote
Old 02-24-2019, 01:46 PM   #25
damien89
 
Join Date: Mar 2009
Posts: 80
Thanks: 30
Thanked 8 Times in 8 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

Quote:
Originally Posted by autostaretx View Post
I'd certainly try yanking LinearLogic's chain on this (again) .... if MB can create a vehicle that the ScanGauge won't connect to, that may also occur on other models in their line.

(try to) Convince LinearLogic to go find a 2016 Sprinter on their own (dealer's lot?) and get it to connect.

--dick
I'll give it a go next week
__________________
2017 Sprinter 516cdi OM 651 7G-Tronic LWB 'LongTail'
damien89 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 02:29 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.