Sprinter-Forum    
 

Go Back   Sprinter-Forum > Sprinter-Based RV's & Conversions > Sprinter RV's & Conversions Talk

Sprinter RV's & Conversions Talk Common features found in Sprinter RV's and Conversions.


 
Thread Tools Display Modes
Old 02-13-2018, 05:10 PM   #1
i3enhamin
 
Join Date: Jun 2017
Location: South Dakota / WA / FL / NM
Posts: 86
Thanks: 64
Thanked 5 Times in 3 Posts
Default Espar D5 coolant pump noise

Do I understand correctly, that a hydronic heater, while in standby / pause (e.g. when it's in parking heater mode), must run its circulation pump continuously in order to sense the coolant temperature? Is that very loud? Do you recommend that it's absolutely necessary to put outside the vehicle? I wouldn't necessarily be making an engine coolant connection and would probably use a heat exchanger if I did. Would an interior soundproof enclosure suffice? I understand that it needs to be in the low point of the circuit and that under the vehicle is typical, but... considering putting everything inside and using 90% water and only 10% propylene glycol so as to use less toxic substances and still have good freeze protection.

Thanks!

Last edited by i3enhamin; 02-13-2018 at 05:13 PM.
i3enhamin is offline   Reply With Quote
Old 02-13-2018, 06:22 PM   #2
sprinterPaul
 
Join Date: Apr 2015
Location: 74 and Sunny
Posts: 830
Thanks: 259
Thanked 468 Times in 291 Posts
Default Re: Espar D5 coolant pump noise

Quote:
Originally Posted by i3enhamin View Post
Do I understand correctly, that a hydronic heater, while in standby / pause (e.g. when it's in parking heater mode), must run its circulation pump continuously in order to sense the coolant temperature? Is that very loud? Do you recommend that it's absolutely necessary to put outside the vehicle? I wouldn't necessarily be making an engine coolant connection and would probably use a heat exchanger if I did. Would an interior soundproof enclosure suffice? I understand that it needs to be in the low point of the circuit and that under the vehicle is typical, but... considering putting everything inside and using 90% water and only 10% propylene glycol so as to use less toxic substances and still have good freeze protection.

Thanks!


the pump is not that loud. It's more like a constant humm vs the ticking/hammer of the fuel pump. However you will clearly be able to hear it. Especially when sleeping. Why not put inside and insulate? Def worth a shot.

Also you need some anti corrosion inhibiters in your hydronic system. Pure water (di) and glycol will likely shorten life span.
sprinterPaul is offline   Reply With Quote
The Following 2 Users Say Thank You to sprinterPaul For This Useful Post:
i3enhamin (02-13-2018), Midwestdrifter (02-15-2018)
Old 02-13-2018, 07:04 PM   #3
i3enhamin
 
Join Date: Jun 2017
Location: South Dakota / WA / FL / NM
Posts: 86
Thanks: 64
Thanked 5 Times in 3 Posts
Default Re: Espar D5 coolant pump noise

I'm very open to putting it inside and insulating it.

Is there a way to "have it both ways", e.g. to get good corrosion inhibition w/o the toxicity of https://en.wikipedia.org/wiki/Ethylene_glycol?
i3enhamin is offline   Reply With Quote
Old 02-13-2018, 08:38 PM   #4
GeorgeRa
2013 Sprinter DIY 144WB
 
GeorgeRa's Avatar
 
Join Date: Feb 2012
Location: Portland, OR
Posts: 3,944
Thanks: 1,135
Thanked 2,109 Times in 1,382 Posts
Default Re: Espar D5 coolant pump noise

I used coolant based on polypropylene glycol which is much less toxic. It is just a regular coolant with corrosion inhibitors plus other goodies. https://peakauto.com/products/antifr...motive/sierra/
__________________
George.

https://goo.gl/photos/2NCR3teXLSwNYSwN8
GeorgeRa is online now   Reply With Quote
The Following User Says Thank You to GeorgeRa For This Useful Post:
i3enhamin (02-13-2018)
Old 02-13-2018, 08:38 PM   #5
i3enhamin
 
Join Date: Jun 2017
Location: South Dakota / WA / FL / NM
Posts: 86
Thanks: 64
Thanked 5 Times in 3 Posts
Default Re: Espar D5 coolant pump noise

To answer my own question... seems like something like this or this would work.

edit: posted at exactly the same time... not a contention that above is not a good idea.
i3enhamin is offline   Reply With Quote
Old 02-13-2018, 08:46 PM   #6
GeorgeRa
2013 Sprinter DIY 144WB
 
GeorgeRa's Avatar
 
Join Date: Feb 2012
Location: Portland, OR
Posts: 3,944
Thanks: 1,135
Thanked 2,109 Times in 1,382 Posts
Default Re: Espar D5 coolant pump noise

I wouldn’t use Camco, it is not automotive brand and it is used to protect RV system from freezing. Peak is a known brand. I use Peak at 50% diluted with distilled water.
__________________
George.

https://goo.gl/photos/2NCR3teXLSwNYSwN8
GeorgeRa is online now   Reply With Quote
The Following User Says Thank You to GeorgeRa For This Useful Post:
i3enhamin (02-13-2018)
Old 02-15-2018, 12:44 AM   #7
Midwestdrifter
 
Join Date: Sep 2013
Location: Roaming Out West for a While
Posts: 5,618
Thanks: 1,079
Thanked 3,920 Times in 2,374 Posts
Default Re: Espar D5 coolant pump noise

The espar pump is fairly quiet if well isolated from the body. Some acoustic insulation would make very quiet.
__________________
2004 T1N | Overland Conversion in Process Completed...For now... | 101,000 118,XXX 137,078 165,000 miles | 140" | High Roof | My Build Thread
Another Random Blog | http://VagariesAbound.blogspot.com
Midwestdrifter is offline   Reply With Quote
The Following User Says Thank You to Midwestdrifter For This Useful Post:
i3enhamin (02-15-2018)

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 12:43 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.