Sprinter-Forum    
 

Go Back   Sprinter-Forum > Regional Discussions > Australia, New Zealand, and Asia Pacific


 
Thread Tools Display Modes
Old 01-27-2010, 10:15 PM   #1
BENDA
 
Join Date: Nov 2009
Location: mid north coast nsw
Posts: 54
Thanks: 0
Thanked 16 Times in 4 Posts
Question part no; 316 serpentine drive belt

hi, can anyone tell me how to find out the part no; for a 316 ex nsw ambulance serpentine belt,parts people say there are 3 possible options, i've tried looking for no; on the belt but can't see one so far,current belt looks ok but like to carry a spare.
ben
BENDA is offline   Reply With Quote
Old 01-27-2010, 10:19 PM   #2
jackbombay
 
Join Date: May 2008
Posts: 1,191
Thanks: 293
Thanked 373 Times in 258 Posts
Default Re: part no; 316 serpentine drive belt

What year is your 316?

Here in North america the early T1Ns have a different engine and belt than the later ones.
jackbombay is online now   Reply With Quote
Old 01-27-2010, 10:35 PM   #3
BENDA
 
Join Date: Nov 2009
Location: mid north coast nsw
Posts: 54
Thanks: 0
Thanked 16 Times in 4 Posts
Default Re: part no; 316 serpentine drive belt

oops sorry my 316 has build date nov;2005
ben
BENDA is offline   Reply With Quote
Old 01-27-2010, 10:42 PM   #4
Altered Sprinter
Happy Little Vegemite
 
Altered Sprinter's Avatar
 
Join Date: Nov 2006
Location: Hobart Tasmania Australia
Posts: 14,942
Thanks: 1,114
Thanked 2,361 Times in 1,867 Posts
Default Re: part no; 316 serpentine drive belt

Here is a schematic of the removal of your belt
Richard
__________________
I get My Rocks off! In a Mercedes Sprinter
AU..Tasmanian time AEST Hobart
There is a peaceful solution.It's called a peace Revolution.
No Shalam - No Shalom
Now lets take back the - Sprinter-Forum.


Of course I'm being totally biased.
Driving my life Away in a 313 Cdi Mercedes-Sprinter


Altered Sprinter is offline   Reply With Quote
Old 01-28-2010, 07:23 AM   #5
mean_in_green
>1,800,000m in MB vans
 
mean_in_green's Avatar
 
Join Date: May 2007
Location: Hotel Mercedes
Posts: 2,885
Thanks: 31
Thanked 674 Times in 432 Posts
Default Re: part no; 316 serpentine drive belt

Make time to check that you have the correct part.

Some "factory" aircon systems were retrofitted locally by dealers, i.e. not during build. These systems can have aircon pump pulleys which differ in circumference to the genuine factory pumps. So a "non-standard yet apparently factory" system could have an oddball belt length.
__________________
Simon, aka MIG - 416CDI (An OM651 Euro5 Panzerwagen that thinks it's a chocolate lime...)
mean_in_green is offline   Reply With Quote
Old 01-28-2010, 08:14 AM   #6
SPRINTERUK
HERE TO HELP
 
Join Date: Jun 2008
Location: ENGLAND
Posts: 663
Thanks: 31
Thanked 264 Times in 114 Posts
Default Re: part no; 316 serpentine drive belt

hi ben
looking at your vin number your sprinter was fitted with factory air con
the part number a0149970492 size 21.36*2171
regards
chris
__________________
chris.case@midlandstruckvan.com
SPRINTERUK is offline   Reply With Quote
Old 01-28-2010, 10:02 AM   #7
Eric Experience
 
Eric Experience's Avatar
 
Join Date: Aug 2008
Location: Victoria Australia
Posts: 3,011
Thanks: 115
Thanked 1,673 Times in 1,099 Posts
Default Re: part no; 316 serpentine drive belt

Benda
The belt is the same as the one used in the Jeep Cheroky? that runs the same motor, available at Repco, Gates belt about half MB price.Also can use the Dayco belt no 6pk2275. Made in USA. Eric.
Eric Experience is offline   Reply With Quote
Old 01-28-2010, 08:48 PM   #8
BENDA
 
Join Date: Nov 2009
Location: mid north coast nsw
Posts: 54
Thanks: 0
Thanked 16 Times in 4 Posts
Default Re: part no; 316 serpentine drive belt

hi fellas ,thanks chris and eric for your info. local parts bloke stocks bosch and says bosch have a belt but does'nt know no;.i'll use your info and see if it helps.some additional info on my 316 it has a second a/c in the roof at the rear which has its compressor mounted below the factory a/c and driven by its own vee belt (pt; no;13A0922) from the crank. again many thanks ben .
BENDA is offline   Reply With Quote
Old 01-30-2010, 12:02 PM   #9
Iggy66
 
Join Date: Mar 2007
Location: Central Coast NSW
Posts: 236
Thanks: 43
Thanked 91 Times in 74 Posts
Default Re: part no; 316 serpentine drive belt

Benda,

I have a 316 ex NSW ambulance 2001 year that uses a 6PK2335 belt, I'm thinking the easiest option for you would be to remove your belt and measure it to determine the length, this is 2335mm for my belt as indicated in the code 6PK2335.

Mark
Iggy66 is offline   Reply With Quote
Old 02-08-2010, 03:14 AM   #10
BENDA
 
Join Date: Nov 2009
Location: mid north coast nsw
Posts: 54
Thanks: 0
Thanked 16 Times in 4 Posts
Default Re: part no; 316 serpentine drive belt

hi mark ,thanks for your suggestion, i think just to be sure i'll do as you say seems like the safest option.
regards ben
BENDA is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT. The time now is 05:16 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.