I know this topic has been covered in other threads... so, please be nice.
Id like to put a second bench seat in my crew van... its a 2019. I measured out 858mm from the original first row position and made a mark (before drilling) and then used the second bench seat rail as a template for the remanding holes... but it seems like the new seat rails are approx 12inches longer and have an additional bolt hole, compared to the older model vans... so if i drilled down to find the captive nuts, the seat rails seem like they would overlap each other... has any one else attempted this for a second row? Any input would be well received. Ive read all the other threads regarding this subject (all older seats/rails) and the only guy that's put in a second row... just moved his seat back to the second position so the "overlap" wouldn't make a difference. Many thanks.
Id like to put a second bench seat in my crew van... its a 2019. I measured out 858mm from the original first row position and made a mark (before drilling) and then used the second bench seat rail as a template for the remanding holes... but it seems like the new seat rails are approx 12inches longer and have an additional bolt hole, compared to the older model vans... so if i drilled down to find the captive nuts, the seat rails seem like they would overlap each other... has any one else attempted this for a second row? Any input would be well received. Ive read all the other threads regarding this subject (all older seats/rails) and the only guy that's put in a second row... just moved his seat back to the second position so the "overlap" wouldn't make a difference. Many thanks.