Sway bars

Greetings to all-- I'd like to reduce the sway in my '13 Siesta both going down the road and parked.

Have any of you fitted sway bars, front or rear? Are you pleased with the increased stiffness? Who made the ones you have and how difficult was the installation? Any caveats?

I've put sway bars on various vehicles I've owned over the years and have been very pleased with the benefit of greater sure-footedness and less sway.

Thanks for your help.

Peter

With a top heavy MH size matters. Suggest using the largest stock — HD rear 33mm with the redesigned bushings. Also check the front for N bushings and large size.
Heavy swaybars will try to keep the vehicle perpendicular to the roads surface along with the drawbacks of that.

Here's a pic of the redesigned bushing on the front:

lots of discussions on suspensions - look at this one to start https://sprinter-source.com/forum/showthread.php?t=39282&highlight=sway+bar

I use a rear Hellwig