Thread: Nag1 TECH ALERT
View Single Post
Old 01-08-2008, 04:04 PM   #2
Not Suitable w/220v Gen
jdcaples's Avatar
Join Date: Mar 2007
Location: Seattle, WA - USA
Posts: 9,118
Thanks: 1,309
Thanked 3,624 Times in 1,943 Posts
Default Re: Nag1 TECH ALERT

Originally Posted by abittenbinder View Post


If there's heavy accumulation of metallic debris you can unbolt(again-the T-30 Torx bit) the solenoid retainers and carefully remove the solenoids. The electrical board can now be unclipped(2 push clips) and separated from the valve body.


If the circuit board looks hopelessly contaminated -it is available as a replacement part and is somewhat reasonable in price. It's mostly encased in plastic and cleaning can be tedious.
Thanks for the excellent write-up, Doktor A.

What is the source of the contamination? Is this entirely T1N-specific, or all Nag1-transmissions?

Would the system benefit from additional filtration, like a by-pass filter on the trans-cooler lines?

jdcaples is offline   Reply With Quote
The Following 2 Users Say Thank You to jdcaples For This Useful Post:
Buckskinner (03-23-2013), long1pham (09-20-2017)