View Single Post
Old 05-23-2019, 07:53 PM   #94
Aqua Puttana
Poly - Thread Finder
 
Aqua Puttana's Avatar
 
Join Date: Apr 2008
Location: The Falls of Niagara, USA
Posts: 24,536
Thanks: 12,512
Thanked 13,753 Times in 8,739 Posts
Default Re: Replacement of front brake pads and rotor

Quote:
Originally Posted by zaskarkid View Post
when replacing rotors and pads, is it necessary to bleed the brake system?
It might be needed.

You should open the bleeder screws before compressing the pads/cylinders back into the caliper. If you don't open the bleed screws you risk pushing dirty brake fluid back into the CAB aka ABS valve module. (Thanks Dennis!) Getting crud back in the CAB module can ruin your day.

When the bleeders are opened there is some risk of air intrusion so the fluid should be bled. If you choose not to open the bleeders, risk the CAB module, and just compress the brake pads back, then no bleeding is needed.

vic
__________________
DAD NAS (N. Amer. Spec) 2004 140 2500 >330,000+ mi. Arctic Whitewash Brush-tone Grey
2006 Freightliner 140 2500HC >183,000+ mi. Arctic Whitewash (Spotted Snow Leopard accents)
"My opinion and worth everything you'll never pay for it." assumed.
Anyone can hold the helm when the sea is calm. Publilius Syrus
"There are only 10 types of people in the world: Those who understand binary, and those who don't." HaWiiLuVeR
16 ounces of unnecessary prevention can be worth a pound of manure.
Aqua Puttana is offline   Reply With Quote
The Following User Says Thank You to Aqua Puttana For This Useful Post:
skwoodwiva (07-03-2019)