View Single Post
Old 01-12-2019, 03:52 AM   #18
sailquik
 
sailquik's Avatar
 
Join Date: Mar 2008
Location: Cape Hatteras, North Carolina
Posts: 8,744
Thanks: 2,994
Thanked 5,471 Times in 3,322 Posts
Default Re: Anyone managed to connect a scan gauge to 16+ sprinter?

Guys,
I was able to simply hook up a Scan Gauge II in the 2019 Demo Van I wrote about.
I did about 75 miles (40 without the SGII) and 35 with a Scan Gauge II that had last been
used (and set up for) an earlier Sprinter (2012 I think).
Not all the PIDs worked, but the important ones like % engine Load (LOD), Engine RPM, MPH,
MAP, etc. seemed to work just fine.
I didn't need to change any protocols or anything else.
I just plugged it in to the much easier to access OBD-II port and it worked.
Hope this helps,
Roger
__________________
2014 Sprinter 516 series (3500 DRW) 170"/4325 mm wb Hi Top Short Back
OM-651 I4 2.143 liter two stage turbo charged with 36.9 PSIA MAP Limit Valve
7 Speed 7G-Tronic, manually shiftable, automatic transmission.
Suspension Seats, Active Safety Package +, Parktronic, OEM Hitch/wiring
OEM back up camera, Bi Xenon light package, fog lamps, headlight washers.
Had 2006 T1N 3500/158|2010 NCV3 519/3500/144|2011 & 2012 NCV3 519/3500 170
sailquik is offline   Reply With Quote