View Single Post
Old 11-12-2014, 05:24 PM   #9
OldWest
T1N Westfalia
 
Join Date: Jul 2009
Posts: 2,134
Thanks: 217
Thanked 636 Times in 483 Posts
Default Re: Rubber LP generator hose leak

Not related.

In the photo above to the right, you can see the gray water valve by Valterra--the square and the square bracket. You can see that a cable is in the middle of the large open square bracket area. After taking proper precautions like jackstands, you can spray some silicon lubricant where the cable runs through the square bracket opening. If you can't see, just spray everything. Had a gray water tank leak from the hose and finally figured out that the gray water valve wasn't closing because of a binding cable. Spraying thus area and the gray water tank valve handle area solved the problem.
OldWest is offline   Reply With Quote