View Single Post
Old 06-30-2017, 01:47 AM   #7
Join Date: Jan 2015
Posts: 2,121
Thanks: 716
Thanked 1,127 Times in 770 Posts
Default Re: Unexpected response from 3M about VHB 4950 tape for rigid solar panels

Wind up lift forces for buildings - caused by vortexes rolling over the corners creating a low pressure over the flat surface - can be as high as 50 psf at the edges and around 20 psf in the middle of the roof area. These are usually just spot type loads - not uniformly applied over the entire roof area. But, mulitply 50 psf times just 1/4 of your panel area to get an idea of what kind of loading you might see on one footing. Up around 100 pounds!
rollerbearing is online now   Reply With Quote