View Single Post
Old 12-25-2007, 08:53 PM   #9
Wichita, KS
topless's Avatar
Join Date: Oct 2006
Posts: 222
Thanks: 4
Thanked 50 Times in 37 Posts
Default Re: Sprinter rear axle

I'm somewhat amazed that a commercial van that was in production for over 10 years, would not have serviceable u-joints. Surely there is a fix from outside the U.S. that we don't know about.

If not, I would do as you mentioned, take the drive shaft to a drive shaft specialist shop and replace those yokes with one that could be repaired.

If a u-joint is available that would replace the stock one, a good machine shop could cut the "c" clip groove in the existing yoke.

Last edited by topless; 12-25-2007 at 08:56 PM.
topless is offline   Reply With Quote