View Single Post
Old 04-21-2013, 07:06 PM   #29
Graphite Dave
Dave Orton
 
Join Date: Dec 2007
Location: Occidental, Ca.
Posts: 6,871
Thanks: 1,159
Thanked 4,250 Times in 2,417 Posts
Default Re: Orton DIY - Misc.

Leveling:

A way to determine how many Lynx plastic leveling blocks are required to level van. My van has a 144" wheelbase. Made a wood block that is 1/16 scale for the wheelbase and tread of the van. 144/16 = 9" long. Did the same for the tread width. The plastic blocks are 1" thick so I used 1/16" thick flat washers. Wood block has a two direction bubble level screwed to the top. I put wood block on the sink counter and then add washers to the corners until the block is level. The number of washers tells me how many Lynx levelers are required to level van.
Attached Images
File Type: jpg 100_1023.JPG (84.3 KB, 1544 views)
File Type: jpg 100_1022.JPG (57.7 KB, 1353 views)
File Type: jpg 100_1024.JPG (98.3 KB, 1322 views)
__________________
Sold 2008 diesel NCV3 144" WB high roof DIY conversion
2015 gas Transit 148" WB high roof for another conversion
Graphite Dave is offline   Reply With Quote
The Following 32 Users Say Thank You to Graphite Dave For This Useful Post:
alan_f (08-31-2014), B.kris (09-02-2018), Billyh12 (04-13-2016), CashedOut (08-30-2018), frednic (08-03-2016), harryrg (08-19-2015), hein (02-26-2014), IanG (08-03-2018), irontent (10-22-2013), irvingj (05-26-2016), JimDyson (04-21-2015), jme3505 (04-12-2016), lukedog (04-06-2016), MeRob (08-16-2016), Michael Vancouver BC (09-09-2017), mozart (02-28-2015), napo (02-26-2014), Norm 123 (09-14-2014), Old Crows (06-09-2014), PaulDavis (05-09-2014), pdxkid (11-13-2018), Peter_C (04-30-2013), pfflyer (04-06-2016), ranchworld (04-21-2015), ronjohn (12-08-2014), Soreal (08-04-2016), Stevec (04-21-2013), Suza (06-20-2016), Terrapin (11-16-2014), tinman (12-08-2014), ToyQuest (07-23-2016), van3b (09-29-2013)