Sprinter-Forum

Sprinter-Forum (https://sprinter-source.com/forum/index.php)
-   Sprinter RV's & Conversions Write-Ups (https://sprinter-source.com/forum/forumdisplay.php?f=119)
-   -   2010 3500 RV build (https://sprinter-source.com/forum/showthread.php?t=27822)

hein 11-05-2019 05:05 AM

Re: 2010 3500 RV build (formerly painted seat pedestals)
 
Quote:

Originally Posted by Rtarannum (Post 818491)
Hi Hein,

Do you have a blog of how you did this? I am very new and would like to attempt doing this myself and could use your help. I will appreciate any further info.

I would be honored to explain all the details and answer your questions in a phone call. Please call at your convenience.

All the best,
Hein
DIYvan
541 490 5098

hein 12-03-2019 07:33 PM

Re: 2010 3500 RV build
 
We have used a Scangauge in our Sprinter for as long as we've had the van and consider it an essential accessory. We had an early version that could not read all the engine parameters so I sent it back for an upgrade and Linear Logic offered to pre-program the gauge with the following:

Quote:

*Description* *TXD* *RXF* *RXD* *MTH* *NAME* *Notes*
Boost Air Temperature (F) 07E02220A6 C32100000000 3010 00090032FE35
BAT 4.22+
DPF Delta Pressure (PSI) 07E02220C4 C32680000000 2810 001D00C80000
DPS 4.22+
Exhaust Back Pressure (PSI) 07E02220C4 C562862037C4 4010
001D00C80000 EBP 4.22+
Upstream DPF Temperature (F) 07E02220C4 C562062037C4 4808
048000190000 DPT 4.22+
Fuel Tank Level (Gallons) 07E02220EE C32580000000 1808 014A007D0000
GAL 4.22+
Oil Temperature (F) 07E02220EE C32300000000 3010 00090032FE35 EOT
4.22+
Rail Pressure (PSI) 07E02220EE C32340000000 4010 001D00C80000 RPS
4.22+
DPF Ash Mass (Grams) 07E0222094 C32300000000 4808 004000190000 DPF
4.22+
Upstream Turbocharger Temperature (F) 07E0222083 C56206203783 4808
048000190000 UPT 4.22+
Actual Gear (#) 07E12190 C56106902000 4808 000100010000 GER 4.22+
Converter Slip Speed (RPM) 07E12190 C32200000000 3010 000100010000
SLP 4.22+
Transmission Fluid Temperature (F) 07E12190 C32200000000 1808
00090005FFC6 TFT 4.22+
I got the gauge back recently and remounted it on top of the steering column using 3M VHB and an angle bracket that I had heat formed out of 1/16" thick ABS plastic.

First photo below. Gauge with bracket and VHB attached.
https://www.impact3d.com/sprinter_sc...t_with_VHB.png

Next. Flaming the plastic so VHB would stick better.
https://www.impact3d.com/sprinter_sc...ic_for_VHB.png

Gauge cable routing into space where tilt-wheel lever come out.
https://www.impact3d.com/sprinter_sc...le_routing.png

Last photo. Final installation as viewed by driver.
https://www.impact3d.com/sprinter_sc...river_view.png

Next up will be to get on the road and watch all the newly accessible parameters. I typically watch LOD, coolant temp, battery voltage and boost pressure. Looking forward to seeing if the engine is in regen mode. Which parameter would be best for determining that?

All the best,
Hein
DIYvan
541 490 5098

SD26 12-04-2019 01:54 PM

Re: 2010 3500 RV build
 
Thanks for the X-Guage codes. I have mine updated to 4.22 with quite a few of the ones you have listed, but not the DPF ash in grams...

hein 03-10-2020 09:16 PM

Re: 2010 3500 RV build
 
Ever since I upgraded the Scanguage with new X-guage codes I have keen to watch for evidence of a regen in process. Last night, Kim and I took the van for a spin and the Diesel Particulate Temp was showing 1650F. Bingo! Let's keep driving... After a few more miles (~15) of interstate driving the temp was back down to more normal 1150F. Regen complete.

Thanks Scanguage!

All the best,
Hein
DIYvan
541 490 5098

GSWatson 03-11-2020 12:18 AM

Re: 2010 3500 RV build
 
Hein, Is that on your 2010 Sprinter? I cant get the codes to work on my 2013, and I thought I had heard that pre-2014 engines didnt respond to certain codes.


Cheers,
Greg

hein 03-11-2020 04:35 AM

Re: 2010 3500 RV build
 
Quote:

Originally Posted by GSWatson (Post 857944)
Hein, Is that on your 2010 Sprinter? I can’t get the codes to work on my 2013, and I thought I had heard that pre-2014 engines didn’t respond to certain codes.


Cheers,
Greg

Yes, its on our 2010. I sent my older Scanguage in for an update and they did the programming for me. I have been monitoring Upstream DPF Temperature (F).

All the best,
Hein
DIYvan
541 490 5098


All times are GMT. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.