Sprinter-Forum

Sprinter-Forum (https://sprinter-source.com/forum/index.php)
-   Australia, New Zealand, and Asia Pacific (https://sprinter-source.com/forum/forumdisplay.php?f=91)
-   -   Installing after market radio (https://sprinter-source.com/forum/showthread.php?t=78415)

Eds 08-10-2019 07:50 AM

Installing after market radio
 
Hi guys 2 months after my accident I was told my exambo 318 2009 was a total write off because the air bags went off. I took my after market gps radio out of it , it is plug and play and was working before I disconnected it. I have now bought a exambo 319 2013 but when I connect this radio just the same as I took it out my old van it comes on for few seconds then goes off I was told I might need a different campus module. Any help would be great cheers Edís.

ravens1705 08-11-2019 03:25 AM

Re: Installing after market radio
 
I have just recently upgraded my radio . the only reason I had to get a canbus module was for the steering wheel controls . I used the power from under the drivers seat . this powers my head unit and amp . sorry that's all I can help with

Eds 08-11-2019 06:17 AM

Re: Installing after market radio
 
Thanks raven1705 what radio did you upgrade to thanks Ed’s.


All times are GMT. The time now is 02:16 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.