Sprinter-Forum

Sprinter-Forum (https://sprinter-source.com/forum/index.php)
-   USA (https://sprinter-source.com/forum/forumdisplay.php?f=88)
-   -   D+ signal wire (https://sprinter-source.com/forum/showthread.php?t=76581)

Youngdotpark 06-03-2019 10:38 PM

D+ signal wire
 
Greetings,

I need to run D+ Wire to my Battery Charger from 2017 Sprinter 3500 in order to make this battery charger to work. Do anyone has a picture and location information where I can run my wire from Sprinter to a Renogy DC - DC Battery Charger? Actual Charging unit is not ON unless I plug a cable from D+ relay. Last I heard that it was under the driver seat. I'd like to see the picture of that location and a possible instruction to run a wire to this charger to charge a house battery.

Thank you,

Youngdotpark 06-03-2019 11:03 PM

Re: D+ signal wire
 
If I don't find a way to run a wire from Sprinter Van to Renogy Dc to Dc battery Charger, I may have to go buy one Battery Isolator to replace Renogy Battery charger. In that case, anyone can recommend a good Battery Isolator for 2017 Sprinter Van?

Appreciate the help.

Cheyenne 06-03-2019 11:28 PM

Re: D+ signal wire
 
Quote:

Originally Posted by Youngdotpark (Post 773631)
Greetings,

I need to run D+ Wire to my Battery Charger from 2017 Sprinter 3500 in order to make this battery charger to work. Do anyone has a picture and location information where I can run my wire from Sprinter to a Renogy DC - DC Battery Charger? Actual Charging unit is not ON unless I plug a cable from D+ relay. Last I heard that it was under the driver seat. I'd like to see the picture of that location and a possible instruction to run a wire to this charger to charge a house battery.

Thank you,

You need to look for your EK1 terminal block under the drivers seat. If you search the NCV3 sub-forum for 'EK1' you should find photos and descriptions of where it is.

Keith.

Edit. Look at post 3 in this thread... https://sprinter-source.com/forum/sh...&highlight=EK1

Youngdotpark 06-03-2019 11:35 PM

Re: D+ signal wire
 
Thank you very much.


All times are GMT. The time now is 04:40 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.