PDA

View Full Version : Sprinter 319


Joi
04-28-2016, 06:15 PM
Maybe someone knows what could be wrong here ! I have changed the oil in my sprinter 319/2012 autmat Trans, and drove about 5km but seal oil filter was not put in place and the oil run out of the engine. then i got message on the screen that the engine lacks oil and the engine turned off . After that I have full oil and put a new seal on the filter and tried to start the car but its dosent . Starter turning only one second and not mor. then i connected the diagnosis and get error code 155700 ENGINE CONNOT STARTED (BLOCKED)

SSMaui
05-07-2016, 07:45 AM
You may have fried #2 bearing...siezed your engine.

Try turning it over (clockwise) with a breaker bar and a 24mm (?cant remember exactly) socket. If can...you gotta clear the Blocking code.
If cannot, the damage probably isn't so bad that you should be able to repair with over sized bearings.