Crankcase Breather filter replacement FOUND

S

superj7777

New member
I'm sure it's common knowledge around here that you have to replace the whole breather assembly if want to replace the filter. After periodically searching (for the last few months) I found a company that offers a replacement filter only.

If I am reading this correctly, looks like you just remove the old filter from inside the assembly, and insert the new filter outside where the hose mounts.

http://www.magnumtuning.com/en/deta...e-up-to-9-16-inch-id/dodge/sprinter-2500-2-7l
https://www.magnumtuning.com/en/detail/crankcase-vent-air-filter-washable/dodge/sprinter-2500-2-7l

I'll be ordering one momentarily and will report back.
 

Attachments

Last edited by a moderator:
seans

seans

Member
How did this work out, and was it for inside the OM647 (04-06) CCV filter?

superj7777 said:
I'm sure it's common knowledge around here that you have to replace the whole breather assembly if want to replace the filter. After periodically searching (for the last few months) I found a company that offers a replacement filter only.

If I am reading this correctly, looks like you just remove the old filter from inside the assembly, and insert the new filter outside where the hose mounts.

http://www.magnumtuning.com/en/deta...e-up-to-9-16-inch-id/dodge/sprinter-2500-2-7l

I'll be ordering one momentarily and will report back.
Click to expand...
 
M

morre

New member
i dont remember seeing anything like that anywhere under breather cover or anywhere else on an engine.
 
P

Pasieka

Member
seans said:
How did this work out, and was it for inside the OM647 (04-06) CCV filter?
Click to expand...
Broken link, curious what you paid and was it what looks like a giant bobbin of yarn? I was thinking of installing an oil catch with some steel wool pads but if ut ou have the original element so I dont have to buy the 400 dollar pos german plastic I would love you for it... was there a part number on your electronic receipt, thinking it's probably used in some non us car I will never see or Austrian tracor... lol

Sent from my SM-N950U using Tapatalk
 
S

skwoodwiva

Member
Pray, tells how this fits going in the center (next to the in/out hose / check valve) of the 3 ring circus oil recovery gizmo?
I pulled mine apart just to see if it might be restricted-not at all, w/ 170 K to boot.
Edit, it is not a filter at all, but an oil coalescing device, receiving clean air box air in one direction or CC fumes in the other.
 
Last edited:
You must log in or register to reply here.

Top Bottom