PDA

View Full Version : 2006 3500 Brake Question


ko4nrbs
09-29-2014, 08:14 PM
I couldn't find any mention of rotor removal in the Service manual.

These five bolts have to be removed to enable you to get the rotor off, correct? What is their torque value?
http://i63.photobucket.com/albums/h144/ko4nrbs/002_zps6b2b7a73.jpg

All four calipers are Bosch:
http://i63.photobucket.com/albums/h144/ko4nrbs/012_zpsb5f23c57.jpg

I'm using the Tractor Supply hydraulic jack/stand combination as a jack stand.
http://i63.photobucket.com/albums/h144/ko4nrbs/008_zpsf3957a58.jpg

This is a 2007 Winnebago View on a 2006 Sprinter chassis. I plan on buying the best rotors and pads Europarts has. Is there a better place to buy?

Thank you,
Bill

calbiker
09-29-2014, 09:10 PM
Take those 5 bolts off. An impact driver makes life easy. Don't know torque. I put about 100 ft-lbs on them. You need someone to hold the brakes.

The rears are more important than the fronts.